Knowledge list

• 10081| How to solve the problem of stains and spots in use after painting?

  2016-08-12

• 10082| What is the reason for the copper return light and discoloration during use after painting?

  2016-08-12

• 10083| How to solve blisters and prickly heat during use after painting?

  2016-08-12

• 10084| How to solve the defects of chalking, cracking and crazing after painting?

  2016-08-12

• 10085| How is the CR-10 Plus Colorimeter better than the CR-10 Colorimeter?

  2016-08-11

• 10086| Analysis of film surface distinctness of image and sheet metal defects

  2016-08-11

• 10087| Cause Analysis and Treatment of Poor Film Surface Glossiness

  2016-08-11

• 10088| Analysis and Treatment of Cracking and Cracks on Film Surface

  2016-08-11

• 10089| How to solve the problem of putty residue and poor drying on the film surface?

  2016-08-11

• 10090| Analysis and Treatment of Lacquer Mist and Dry Spray on Film Surface

  2016-08-11

• 10091| What are the reasons for scratches and grinding marks on the surface of the film?

  2016-08-11

• 10092| Analysis of film surface color difference and metal flash color inhomogeneity

  2016-08-11

• 10093| How to solve the dark color and shadow on the surface of the film?

  2016-08-11

• 10094| Analysis of the reasons for the defects of film surface color uneven hair, floating color and color separation

  2016-08-11

• 10095| Adhesion of film surface, film flkn defects how to solve?

  2016-08-11

• 10096| How to solve the defects of film surface shrinkage, shrinkage, depression and fish eye?

  2016-08-11

• 10097| How to solve the problem of wrinkling and blistering on the surface of the film?

  2016-08-11

• 10098| Why do particles and dust appear on the surface of the film?

  2016-08-11

• 10099| How to determine Coating percent solids?

  2016-08-10

• 10100| Painting process appears poor cover, how to solve the bottom?

  2016-08-10

• 10101| What causes orange peel, pomelo peel and bite during painting?

  2016-08-10

• 10102| How to deal with bleeding and bottom pollution during painting?

  2016-08-10

• 10103| Causes and Countermeasures of Whitening and Blushing in Painting Process

  2016-08-10

• 10104| Analysis of film sagging, trickle and reflux during painting

  2016-08-10

• 10105| Coating and coating inspection standards

  2016-08-10

• 10106| Introduction of Conditioning Test Detection Method

  2016-08-10

• 10107| Chemical and Corrosion Resistance Testing of Films

  2016-08-10

• 10108| Summary of heat resistance, cold resistance and temperature resistance denaturation detection

  2016-08-10

• 10109| Summary of coating weathering resistance detection methods

  2016-08-10

• 10110| Film orange peel determination

  2016-08-10