The film coating machine can be applied to the preparation of electronic film. The electronic film is prepared and debugged by using polyethylene film as the base material, acrylate as the adhesive, and adding several special additives.
The following is the coating application of electronic film and its film making method:
Prepare the substrate: The electronic film needs to be coated on the substrate, which can be polyester film, polyimide film, glass, etc. The substrate needs to be dry, clean, flat, and have a smooth surface.
Preparation of coating solution: Mix the required electronic film coating materials (such as polymers, conductive agents, stabilizers, etc.) and solvents in a certain proportion to form a coating solution.
Coating: put the coating solution into the coating machine, adjust the parameters of the coating machine, such as coating speed, coating pressure, etc., according to the required coating thickness and coating speed. Start the Film Applicator to allow the coating solution to be evenly coated on the substrate. Different application methods can be used, such as knife coating, spraying, etc.
Drying: After the coating is completed, the substrate is placed in a drying chamber for drying so that the coating solution forms a firm film on the substrate.
Processing: As required, the film can be subjected to subsequent processing, such as printing, etching, casting, etc.
Test: Test the prepared electronic film, such as electrical properties, mechanical properties, etc.
In short, the film coating machine can realize the effective coating of electronic film, improve production efficiency and product quality. During the coating process, the parameters of the coating machine need to be adjusted reasonably to achieve the required coating thickness and coating quality. Through subsequent processes such as drying, processing and testing, the required electronic film can be obtained.
