Rubber plaster is a plaster formed by mixing medicine or medicinal material extracts with a rubber-based matrix. The Film Applicator can also be used for the coating of rubber plaster.
Membrane method
Prepare the rubber paste solution, add the required solvent and other additives as required, and adjust the viscosity and rheological properties of the solution.
Use the coating head of the Film Applicator with the adjustable pressure plate assembly to pour the rubber paste solution into the coating head.
Set the movement speed and coating pressure of the coating head according to the desired film thickness and speed.
Place the substrate under the applicator head, start the applicator and begin coating.
After coating, the substrate is removed from the coating machine and placed in a drying room to dry.
Subsequent processing of the dried coating film, such as cutting, bending, etc.
NBCHAO reminds you: when coating rubber paste on the film coating machine, it is necessary to ensure the cleanliness and flatness of the surface of the coating head and the coating plate to ensure the uniformity and quality of the film. In addition, it is also necessary to set reasonable coating parameters according to the characteristics and requirements of the rubber paste used to obtain a better coating effect. After the coating is finished, it is necessary to clean the coating head and the coating plate in time to ensure the long-term stable operation of the coating equipment.
