Automatic Film Applicator has a wide range of applications in the film application of polymer materials, and can be used to prepare polymer material coatings of various shapes and Film thicknesses, such as polymer films, polymer film interlayers, polymer composite films, etc. Automatic Film Applicator can precisely control the coating Film thickness, and can achieve coating preparation of different Film thicknesses and masses by adjusting parameters such as coating rotational speed, scraper material and angle, Operating Temperature and humidity.
The film method of polymer materials can choose different methods according to material properties and coating application requirements, such as:
Solution dipping method: The polymer material is dissolved in the solvent, the solution is uniformly Spreader on the surface of the substrate by a Spreader, and then it is formed into a thin film by drying or stoving.
Hot melt method: After heating the polymer material to the melting point, Spreader forms a thin film on the surface of the substrate during the cooling process.
Solution spin coating method: The polymer material is dissolved in the solvent, the substrate is fixed on the spin coating table, at high speed swirl/spin by Spreader uniform Spreader on the surface of the substrate, and then by drying or stoving to form a thin film.
Lame plating method: dissolve the polymer material in a solvent or melt it, spray the Coating evenly on the surface of the substrate through a sprayer, and then form a film by drying or stoving.
