Plastic products are a widely used material, often used in the manufacture of various consumer goods, industrial supplies and medical equipment. The purpose of measuring the gloss of plastic products is to evaluate their appearance quality and surface treatment effect. Gloss refers to the ability of the surface of an object to reflect light, and is usually used to measure its gloss and surface smoothness. Quantitative measurement of the gloss of plastic products can detect whether the surface is flat, smooth and uniform, and avoid defects such as protrusions and depressions on the surface. In addition, plastic products usually need to have good appearance quality, such as high gloss, uniform color, etc. Measuring gloss can ensure that the appearance quality of plastic products meets the required standards, improve their aesthetics and durability, and prolong their service life . For some special plastics, such as optical plastics, measuring gloss is also very critical, because their use environment has high requirements on light scattering and transmission.
Gloss is one of the important surface properties of plastic products, which can be quantitatively measured by a gloss meter. Gloss meters are widely used in the production and quality control of plastic products, such as the surface gloss detection of plastic products such as automotive interiors, electronic equipment casings, and toys.
application
Measuring the glossiness of the surface of plastic products can quickly judge whether the surface glossiness of plastic products meets the design requirements, so as to make adjustments and improvements.
It can carry out quality control of plastic products to ensure that the surface gloss of plastic products meets certain standard requirements.
Measurement steps
Place the sample to be tested on the test platform of the gloss meter, and note that the surface of the platform should be clean and free of foreign matter.
Adjust the test mode, angle and light source parameters of the gloss meter.
Press the measurement button to measure, and the gloss meter will measure the light reflection and scattering on the surface of the sample to obtain a gloss value.
Record the measurement results for subsequent analysis and judgment.
NBCHAO reminds you: different plastic products may have different surface gloss requirements, so the corresponding parameter adjustment and analysis and judgment should be carried out according to the specific requirements when measuring.
