Measuring the thickness of plastic powder is very important, because it is directly related to the quality and performance of the coating. Plastic powder coating can increase the hardness and corrosion resistance of the material surface, and improve the service life of the material in harsh environments. If the coating is too thin, its protective effect and durability will be affected, and problems such as corrosion and oxidation will easily occur, resulting in surface damage and loss of protective effect. However, if the coating is too thick, it will not only increase the cost, but also easily cause quality problems such as peeling and cracking, which will affect the performance and stability of the coating. In addition, the plastic powder coating has certain appearance requirements, so measuring the thickness of the plastic powder coating can help manufacturers ensure the quality and appearance of the product, and ensure the uniformity and gloss of the plastic powder coating.
The coating Thickness Gauge can be used to measure the thickness of the plastic powder sprayed on the surface of the measured object in the measurement of the thickness of the plastic powder, so as to ensure the quality and service life of the plastic powder spray. The operation steps are as follows:
Preparations: Turn on the power of the coating Thickness Gauge, and install the test probe according to the instrument manual. According to the difference of the measured object, select the appropriate test mode and probe type, and calibrate the instrument to the appropriate range.
Measurement location: Select the location of the plastic powder coating that needs to be measured, usually the location with thicker coating should be selected for testing. Avoid selecting defective locations such as breakage, cracks, etc.
Measurement method: stick the probe to the surface of the measured object to ensure accurate and reliable test results. According to the instructions of the coating Thickness Gauge, move the probe evenly on the surface of the measured object until accurate measurement results are obtained. The same position needs to be measured multiple times, and the average value of multiple measurements is taken.
Measurement records: record measurement results, and perform data analysis and comparison. If the measurement results are not within the expected range, further inspection and processing of the plastic powder coating is required.
Cleaning and maintenance: After use, clean the surface of the instrument and the test probe to ensure that the instrument is dry, dust-free and stored normally. Maintain and maintain the instrument regularly to ensure the performance and accuracy of the instrument.
