Epoxy floor is a floor coating widely used in industrial and commercial places, usually used to protect the ground from damage, improve the wear resistance and aesthetics of the ground. In the construction process, the thickness of the epoxy floor is a very critical indicator, because it directly affects the service life and performance of the floor.
The coating Thickness Gauge can be used to measure the thickness of the epoxy floor coating in the thickness measurement of the epoxy floor. The operation steps are as follows:
Preparations: Turn on the power of the coating Thickness Gauge, and install the test probe according to the instrument manual. Select the appropriate test mode and probe type, and calibrate the instrument to the appropriate range.
Measurement location: Select the location of the epoxy floor coating that needs to be measured, and clean it with a detergent to ensure that there are no impurities or dirt on the surface.
Measurement method: place the probe on the surface of the epoxy floor to be tested, make it perpendicular to the surface, and apply appropriate pressure to ensure accurate measurement. Observe the reading on the coating Thickness Gauge display and record the measurement. The same position needs to be measured multiple times, and the average value of multiple measurements is taken.
Measurement records: record measurement results, and perform data analysis and comparison. If the measurement results are not within the expected range, further inspection and treatment of the coating is required.
Cleaning and maintenance: After use, clean the surface of the instrument and the test probe to ensure that the instrument is dry, dust-free and stored normally. Maintain and maintain the instrument regularly to ensure the performance and accuracy of the instrument.
