The experimental Incubator is a commonly used experimental equipment, which is used to simulate various experiments in a constant temperature environment, such as culturing cells, chemical reactions, etc. Here are some common problems you may encounter and how to calibrate them:
common problem
The temperature reading is inaccurate.
The temperature is unstable.
The appliance is heating unevenly.
The device does not work or stops working.
An error occurred in program operation.
Calibration method
Temperature Calibration: Place the thermometer in the Incubator and set the Incubator to a known temperature. After waiting for a period of time, compare the thermometer reading with the temperature reading displayed by the Incubator. If there is a difference, a calibration adjustment is required. Calibration can be performed by adjusting the temperature calibration parameters in the controller.
Equipment Uniformity Calibration: Place several thermometers inside the Incubator and set the Incubator to a known temperature. After waiting for a period of time, compare whether the readings of each metering point are consistent. If there is a difference, a uniformity calibration adjustment is required. This can be done by adjusting how and where the heating and fans work, and by adjusting the position of items inside the Incubator.
North and South Chao reminds you: the experimental Incubator needs to be calibrated and maintained regularly. At the same time, it is necessary to regularly clean the interior of the equipment, check the performance and condition of heating, control, sensors and other equipment, and replace or repair problematic parts in time. In addition, it is recommended to carry out maintenance according to the operation manual of the equipment and the maintenance instructions provided by the manufacturer to ensure the long-term stable operation of the equipment.
Precautions for use
In the process of using the experimental Incubator, you also need to pay attention to the following points:
Reasonably arrange the placement of the samples to ensure that the samples can be subjected to a uniform temperature distribution.
Do not accumulate too much sundries or samples inside the Incubator to avoid affecting the operation of the equipment and the accuracy of the data.
According to actual needs, the temperature range and accuracy of the Incubator should be reasonably selected to avoid inaccurate test data due to mismatching of equipment parameters.
Before testing, excellent preheat treatment is performed to ensure that the equipment can reach the required temperature conditions.
During the use of equipment, record temperature changes and test data in time, and analyze and process them as needed.
In short, the experimental Incubator is a commonly used experimental equipment, but it is necessary to pay attention to the use and maintenance of the equipment during use to ensure the stability of the equipment and the accuracy of the test data.
