Far-infrared rapid Drying Oven is an effective drying equipment using far-infrared heating technology, which can be used to quickly dry various materials, especially materials that are easily damaged by heat. It is effective, energy-saving, environmentally friendly, and easy to operate, and is widely used in food, pharmaceutical, chemical, textile, paper and other industries.
common problem
The drying effect is not ideal.
Drying is too slow.
The temperature of the device is unstable.
The appliance is heating unevenly.
The device is too noisy.
Solution
The drying effect is not satisfactory Solution: Check whether the parameters such as the placement of the items, drying time and temperature are correct, and check whether there is pollution or water accumulation inside the equipment. Parameters such as the placement of items, drying time, and temperature can be adjusted appropriately, or the equipment can be cleaned.
The drying speed is too slow Solution : Check whether the heating power of the equipment meets the requirements, and check whether there is a heating element failure or parts that need to be replaced. According to actual needs, parameters such as heating power and temperature of the equipment can be adjusted, or components such as heating elements can be replaced.
The solution to the unstable temperature of the equipment : check the working status of the temperature controller and the position of the sensor, and find out whether the controller or sensor is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or readjusting the temperature control parameters.
The solution to uneven heating of the equipment : check the working status and position of the heater, and see if it is necessary to readjust the position and heating time of the heater so that the items in the equipment can be heated evenly.
Excessive equipment noise Solution : If the equipment noise is too loud, you need to check whether the power supply voltage and ground wire of the equipment are normal, and find out whether the heater or blower is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or repositioning the equipment.
Beichao reminds you: the far infrared fast drying box needs to be calibrated and maintained regularly. At the same time, it is necessary to regularly clean the interior of the equipment, check the performance and condition of heaters, controllers, sensors and other equipment, and replace or repair problematic parts in time. In addition, it is recommended to carry out maintenance according to the operation manual of the equipment and the maintenance instructions provided by the manufacturer to ensure the long-term stable operation of the equipment.
Precautions for use
In the process of using the far-infrared fast drying box, the following points should also be paid attention to:
Reasonably arrange the placement of samples to ensure that the samples can be heated and distributed evenly.
Do not accumulate too much sundries or samples inside the equipment, so as not to affect the operation of the equipment and the accuracy of the data.
Before using the equipment, it is necessary to carry out preheating treatment to ensure that the equipment can reach the required temperature.
According to actual needs, the heating power and precision of the far-infrared fast Drying Oven should be reasonably selected to avoid inaccurate test data due to mismatching of equipment parameters.
During the use of the equipment, the heating changes and test data are recorded in time, and analyzed and processed as needed.
In short, the far-infrared fast Drying Oven is an effective drying equipment. During use, attention should be paid to the use and maintenance of the equipment to ensure the stability of the equipment and the accuracy of the test data.
