Industrial oven is a kind of equipment used for baking, drying, curing, heat treatment and other operations of large quantities of materials. It has a large studio volume and a high-power heating system, which can quickly and evenly transfer heat to the surface of the material to achieve fast and effective heating and processing.
An Industrial Oven usually consists of a heating system, a circulation fan, a control system, a working chamber, and an inlet and outlet device. Heating systems usually use electric heating elements, gas stoves or steam heating to heat the air to a set temperature. Circulation fans circulate hot air to improve thermal efficiency and toasting results. The control system can accurately control parameters such as temperature, humidity, and time to meet the processing needs of different materials. The design and construction of the working room and the feeding and discharging device will also vary according to different usage scenarios and material requirements.
common problem
Temperature control is unstable.
The temperature is too high or too low.
Uneven heating.
The oven door is not sealing properly.
Too much noise.
Solution
Unstable temperature control treatment: Check the working status of the temperature controller and the position of the sensor, and find out whether the controller or sensor is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or readjusting the temperature control parameters.
Overheating or overheating treatment: Check whether the heating power of the equipment meets the requirements, and check whether there is a heating element failure or parts that need to be replaced. According to actual needs, parameters such as heating power and temperature of the equipment can be adjusted, or components such as heating elements can be replaced.
Uneven heating treatment: check the working status and position of the heater, and check whether the position and heating time of the heater need to be readjusted so that the items in the equipment can be heated evenly.
The oven door is not tightly sealed: check the sealing performance of the oven door, and find out whether there are aging sealing strips or parts that need to be replaced. The problem can be solved by replacing or repairing related parts, or repositioning the oven door.
Excessive noise treatment: If the equipment is too noisy, check whether the power supply voltage and ground wire of the equipment are normal, and find out whether the heater or blower is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or repositioning the equipment.
Beichao reminds you: Industrial ovens need to be calibrated and maintained regularly. At the same time, it is necessary to regularly clean the interior of the equipment, check the performance and condition of heaters, controllers, sensors and other equipment, and replace or repair problematic parts in time. In addition, it is recommended to carry out maintenance according to the operation manual of the equipment and the maintenance instructions provided by the manufacturer to ensure the long-term stable operation of the equipment.
Precautions
In the process of using Industrial Ovens, you also need to pay attention to the following points:
Reasonably arrange the placement of the items to be baked to ensure that the items to be baked can be heated and distributed evenly.
Do not accumulate too much sundries or items to be baked inside the oven to avoid overloading or overheating the equipment
Make sure that the equipment is well ventilated to avoid dangers such as equipment damage or fire caused by overheating or overloading.
When using the equipment, you should follow the equipment's instructions and safety operating procedures to ensure safe and reliable operation.
When using the equipment, avoid putting wet items directly into the oven for heating, so as to avoid equipment failure or damage due to excessive steam.
When using the equipment, care should be taken to avoid over-baking, so as not to affect the quality and performance of baked items.
In short, the Industrial Oven is a commonly used heating equipment, and attention should be paid to the use and maintenance of the equipment to ensure the stability and service life of the equipment. At the same time, it is necessary to perform regular maintenance according to the manufacturer's instructions and maintenance instructions to ensure the long-term reliable operation of the equipment.
