The laboratory Incubator is a kind of equipment used for the cultivation, reproduction and experimental operation of biological samples such as cells, microorganisms and plants. It can provide stable environmental parameters, such as temperature, humidity, gas concentration, etc., to meet the growth and reproduction needs of biological samples during the experiment.
common problem
Temperature control is unstable.
The temperature is too high or too low.
Humidity control is inaccurate.
Humidity is too high or too low.
Too much noise.
Damaged or malfunctioning equipment.
Solution
Unstable temperature control treatment: Check the working status of the temperature controller and the position of the sensor, and find out whether the controller or sensor is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or readjusting the temperature control parameters.
Overheating or overheating treatment: Check whether the heating power of the equipment meets the requirements, and check whether there is a heating element failure or parts that need to be replaced. According to actual needs, parameters such as heating power and temperature of the equipment can be adjusted, or components such as heating elements can be replaced.
Inaccurate humidity control: Check the working status of the humidity controller and the location of the sensor, and find out whether the controller or sensor is faulty or needs to be replaced. The problem can be solved by replacing or repairing related parts, or readjusting the humidity control parameters.
Humidity is too high or too low: Check the humidity control parameters of the equipment to see if it is necessary to adjust the humidity adjustment device of the equipment, or replace related parts to solve the problem.
Excessive noise treatment: Check whether the equipment is in a stable working condition, find out whether there is a fault in the equipment or parts that need to be replaced, and the problem can be solved by replacing or repairing the relevant parts.
Equipment damage or failure treatment: Check whether the equipment is in normal use, check whether the equipment needs to be replaced or repaired, and maintain the equipment in time according to the maintenance instructions of the equipment to ensure the normal use of the equipment.
Beichao reminds you: laboratory Incubators need to be calibrated and maintained regularly. At the same time, it is necessary to regularly clean the interior of the equipment, check the performance and condition of heaters, controllers, sensors and other equipment, and replace or repair problematic parts in time. In addition, it is recommended to carry out maintenance according to the operation manual of the equipment and the maintenance instructions provided by the manufacturer to ensure the long-term stable operation of the equipment.
Precautions
In the process of using the laboratory Incubator, you also need to pay attention to the following points:
Reasonably arrange the position and quantity of samples to be cultured to ensure that the samples to be cultured can be evenly affected by temperature and humidity.
According to the needs of the samples to be cultured, select the appropriate temperature and humidity conditions to ensure the normal growth and reproduction of the samples.
In the process of using the laboratory Incubator, the instructions for use and safety operating procedures of the equipment should be followed to ensure safe and reliable operation.
If you need to cultivate toxic and harmful microorganisms, you should pay attention to safe operation to prevent the leakage of harmful microorganisms and endanger the health of personnel.
Avoid excessive use when using the equipment, so as not to affect the life and use effect of the equipment.
In the process of cultivating samples, the parameters such as temperature and humidity of the equipment should be checked regularly to ensure the normal operation and use effect of the equipment.
In short, the laboratory Incubator is a commonly used laboratory equipment, and attention should be paid to the use and maintenance of the equipment to ensure the stability and service life of the equipment. At the same time, it is necessary to perform regular maintenance according to the manufacturer's instructions and maintenance instructions to ensure the long-term reliable operation of the equipment.
