List of water-based paints testing laboratory equipment

Water-based paint is a type of paint that uses water as the main solvent, which is more environmentally friendly and easier to clean than traditional solvent-based paints, so it is becoming more and more popular in architectural coatings. The properties of water-based coatings that need to be tested include: color and hiding power, drying time, adhesion, durability, water resistance, heat resistance, chemical stability, corrosion resistance and environmental protection. By testing these properties, the quality and performance of water-based coatings can be ensured to meet the standard requirements, so as to improve their application value in architectural coatings.

serial numberdevice nameFunctional descriptionClassification
1lab tableWorkbench for placing equipment and performing experimental operationsbasic equipment
2Basic laboratory equipment such as test tubes, beakers, and burettesBasic laboratory equipment required for paint sample handling and experimental manipulationsbasic equipment
3Electronic BalanceAccurately measure sample weightbasic equipment
4ViscometerMeasuring Viscosity and Flow Properties of CoatingsPhysical property testing equipment
5Density meterMeasuring the Density of PaintPhysical property testing equipment
6Suspended solid content DetectorDetection of solid particle content in paintPhysical property testing equipment
7Wet Film Thickness MeterMeasuring the thickness of the film formed by paint on the surfacePhysical property testing equipment
8Dry Film Thickness MeterMeasuring the thickness of dried paint filmsPhysical property testing equipment
9Abrasion TesterTest the abrasion resistance of the coatingPhysical property testing equipment
10Impact TesterTesting the impact resistance of coatingsPhysical property testing equipment
11Gloss meterMeasuring the Gloss of CoatingsPhysical property testing equipment
12Adhesion TesterTest the adhesion of the coatingPhysical property testing equipment
13pH meterMeasuring the pH of PaintChemical performance testing equipment
14UV-visible Spectrophotometer Analysis of organic and inorganic components in coatingsChemical performance testing equipment
15Humidity ChamberSimulate aging in high-temperature and high-humidity environmentsAging Performance Test Equipment
16UV aging test machineSimulates aging under UV radiationAging Performance Test Equipment
17Salt spray Test ChamberCorrosion simulation in salt spray environmentAging
18Pirelli testing machineTest the tensile, bending and other mechanical properties of coatings after agingAging Performance Test Equipment
19safety cabinetStorage of Hazardous Goods and WasteAuxiliary Equipment and Items
20Constant temperature Water BathProcess paint samples at a constant temperatureAuxiliary Equipment and Items
twenty oneNitrogen blowerConcentrate paint samples for further analysisAuxiliary Equipment and Items
twenty twominiature pH electrodeAccurately measure the pH of small volumes of liquidsAuxiliary Equipment and Items
twenty threeAging Sample Preparation EquipmentUsed to prepare paint samples for agingAuxiliary Equipment and Items
twenty fourSample Cutting ToolFor cutting coated samples for testingAuxiliary Equipment and Items
25timerUsed to accurately measure the time of the experimental processAuxiliary Equipment and Items
26Solvents, diluents, standard samples, etc.For sample processing and calibrating instruments etc.Auxiliary Equipment and Items

The equipment and items listed in this table may not be required by all laboratories, and the specific equipment needs should be evaluated and determined according to the specific conditions of the laboratory. At the same time, according to the specific requirements of the experiment, the laboratory may need other equipment and items, such as safety glasses, gloves, masks and other personal protective equipment.

NBCHAO E-shop
Guess you like it
Relevant knowledge