When there is a deviation in the speed of the high-speed disperser, you can try the following solutions:
Calibration speed: Use a professional speed measuring instrument to accurately measure the speed of the disperser and compare it with the set value. If it is found that the speed deviation is large, the speed can be calibrated. For calibration methods, please refer to the operation manual of the disperser or consult the equipment manufacturer.
Check the transmission system: The speed deviation may be related to the transmission system. Check whether the transmission belt, transmission belt, gear and other transmission parts are loose, worn or damaged. If there is a problem, replace or adjust it in time.
Check motor control: RPM deviation may also be related to motor control. Check that the power supply of the motor is stable and that the motor controller is set correctly. Make sure the motor can work at the set speed.
Cleaning and Lubrication: The rotating parts of the disperser may be affected by impurities or deposits, resulting in rotational speed deviations. Regularly clean the rotating parts of the disperser and lubricate them in a timely manner to ensure smooth operation.
Adjustment Devices and Parameters: Some dispersers may have speed adjustment devices or parameter settings that can be corrected by adjusting the speed regulator, parameter settings, or program controls.
Consult professional and technical personnel: If the above methods cannot solve the problem of speed deviation, it is recommended to consult the equipment manufacturer or professional and technical personnel for more detailed guidance and support.
It is important to ensure that the power is disconnected and the relevant safe operating procedures are followed before any repair or adjustment operation. Depending on the specific disperser model and equipment characteristics, different solutions may be required, so it is recommended to refer to the equipment's operating manual or consult a professional.
