If the high-speed disperser cannot be slowed down, there may be several reasons and solutions:
Power supply problem: Check whether the power supply is normal and ensure that the power wiring of the disperser is correct and stable. If there is a power supply problem, the power line can be replaced or repaired.
Control system failure: Check the control system of the disperser, including the start button, control panel and control circuit, etc., to ensure that the control system works normally. If a fault is found, you can ask professional technicians to repair or replace related parts.
Mechanical failure: Check the mechanical parts of the disperser, including motors, reducers, transmission belts, etc., to ensure that they are running normally and not damaged. If a fault or damage is found, the relevant parts need to be repaired or replaced.
Overload problem: If the disperser is subjected to excessive load or overload operation during operation, it may not be able to slow down. During operation, make sure that the load is controlled within the rated range of the disperser to avoid overload operation.
Lubrication problems: The lubrication system of the disperser plays an important role in reducing the speed. Make sure the lubrication system works normally and add lubricant in time to ensure the smooth operation of mechanical parts.
If the above methods still cannot solve the problem, it is recommended to contact the manufacturer of the disperser or the after-sales services department for professional technical support and maintenance services. They can provide specific fault diagnosis and solutions to ensure the normal operation of the disperser.
