The hydraulic multifunctional testing machine currently on the market has a capacity of 12,000~120,000 pounds, and can perform more than 480 tests repeatedly within an 8-hour working day, with an average of 60 samples per hour. It is understood that in use When these hydraulic Tensile Testing Machines start the test, the automatic program control device may complete the test task in the shortest time. In addition, the operator does not need human hands to keep watch while the operator applies the repetitive multifunctional tensile test speed.
During operation, until a predetermined load is reached, it is loaded at a pre-adjusted high speed. Then, the loading speed is automatically reduced to the required lower speed until the second specified point. Then, the testing machine is loaded rapidly until the sample breaks.
The total alarm can send an audible signal to the operator to show that the yield point has been passed and the Tensile Testing Machine has entered a faster breaking loading speed.
The final tensile strength is indicated by a passive hand on the dial. After the sample breaks, the load is automatically removed, and the beam of the testing machine automatically returns to the initial test position, ready to quickly put in the next sample.
If what needs to be done is not a repetitive test, the testing machine can be controlled by manual operation. "Loading and unloading functions.
Super "L" type multifunctional Tensile Testing Machine can be equipped with automatic indicating electronic Recorder and additional pneumatic spin-off extensometer according to actual needs, so as to make a series of stress-strain curves without repetition during rapid continuous testing. In order to increase the test speed and increase the convenience of the test, the testing machine company can be equipped with a remote hydraulic chuck.
