TQC Viscosity cup series model Daquan [Selection guide]

    Viscosity cups were originally designed for quick viscosity testing of Newtonian or near-Newtonian fluids. Today's Viscosity Cups are produced according to a number of international standards that have been in existence for many years and specify not only the tight dimensional tolerances required in the process, but also their use and the data records obtained.

    Each TQC Viscosity Cup is produced under an ongoing quality control program and is engraved with a serial number. Most Viscosity Cups are made of aluminum titanium and stainless steel. All filters embedded in the bottom of the Viscosity Cup are made of stainless steel.

Viscosity Cups for All Standards

Viscosity Cup with Replaceable Filter (Model: VF2020 )

       The special aluminum Viscosity Cup is equipped with a stainless steel filter positioner, which can replace the stainless steel filter with a hole diameter of 1mm-8mm. Stainless steel filter to be ordered separately. The internal dimensions of the replaceable filter Viscosity Cup are similar to the DIN53211 standard.

Dip Viscosity Cup

        Made of stainless steel. It is used in the viscosity measurement of coatings and other liquids in practical applications and production, and the effect is satisfactory.