Recently, there is a very popular Internet language "no comparison, no harm". Today, the editor took out three popular brands from three countries to compete in strength, come on, hurt each other!
Listed below are three types of scraper Fineness Meters with the same measurement range of 0~15μm, namely Pushhen from CHINA, TQC from the Netherlands, and Elcometer from the UK. From the comparative analysis in the table below, the significant difference is obvious. The material used by Elcometer in the UK is hardened stainless steel. Of course, you can choose the appropriate scraper Fineness Meter according to your own needs.
If you want to know more about scraper Fineness Meters of different brands and models, you can log in to check the instrument, or you can directly click the link to visit http://cha.nbchao.com/list43.html
| than category | Scraper Gauge | PU-2410 | VF2110 | Elcometer 2020/3 |
|---|---|---|---|---|
| product picture |  |  |  | |
| brand | Pushin | TQC | Elcometer | |
| place of origin | CHINA | Netherlands | U.K. | |
| Model comparison | ||||
| type | single slot | double slot | double slot | |
| Measuring range | 0-15μm | 0-15μm | 0-15μm | |
| Scale unit | Micron (um) Hegman (H) Mill (MILS) | Micron (um) Hegman (H) North (PCU) | Micron (um) Hegman (H) Mill (MILS) North (PCU) | |
| precision | other | 2μm | 2μm | |
| Division value | 1.5μm | 1.5μm | 1.5μm | |
| Specification comparison | ||||
| Scrape type | single slot | double slot | double slot | |
| Measuring range (μm) | 0-15 | 0~15 | 0~15 | |
| Scale unit | Micron (μm), Hegman (H), Mill (MILS) | Micron (μm), Hegman (H), North (PCU) | Micron (um), Hegman (H), Mill (MILS), North (PCU) | |
| Graduation value (μm) | 1.5 | 1.5 | 1.5 | |
| Accuracy (μm) | 2 | ±2μm | ||
| scraper material | Stainless steel | Stainless steel | hardened stainless steel | |
| scraper material | Stainless steel | Stainless steel | hardened stainless steel | |
| Scraper size(mm) | 170×50×15 | 175x60x12 | 180 x 40 x 12 | |
| Scraper size(mm) | ||||
| Applicable standard | GB/T 6753.1-2007 | ASTM D1210, ASTM D1316, DIN 53203, DIN EN ISO NF21524, FTMS 141 a M.4411.1 ISO1524, NFT 30 046 | ASTM D 1210, AS/NZS 1580.204.1 DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046 | |
