In this issue, NBCHAO will take you to enjoy the real photos of the newly released TQC CC1000 series adhesion Tester, the model is VF1842. The main feature of the CC1000 series adhesion Tester is that the cutter head is round and has 4 identical scratching knives. For common scratchers, the teeth are often not durable, despite its hardness. It is the most wear-resistant of the entire cross-cutting device, but the friction with the test iron plate and the paint layer is also avoided frequently. Therefore, after a period of use, the experimenters often replace the cross-cutting device in order to obtain more accurate test results. cutter head. The CC1000 series of cross-hatchers equals a 4-fold increase in service life.
Of course, friends who purchase may despise the editor: Isn’t it enough to buy another cutter head at that time? It would be nice if the money didn't have to be paid all at once! For the experimenters, if an environment can be created, they can easily twist the cross-cutting knife of the same specification with one movement, and use multiple cross-cutting knives of the same specification to do multiple cross-cutting tests at any time, and compare them to make a conclusion. Is it a good thing to have a more reasonable adhesion evaluation?
<1>The VF1842 cross-cut tool is a set type, unlike the CC2000 series, you can buy a single cross-cut knife. See the picture below for accessories
<2>Of course, such a thing as "buy a box and return a pearl" will not happen in the testing instrument industry. So let's also take an overall frontal photo of the cross-cutting device. Does the head look like a "bird"?
<3> Look carefully at the cutter head of the scratcher. Just release the button and rotate the cutter head to easily use different scratchers of the same specification for the scratch test.
<4>TQC comes with a 7-shaped simple screwdriver, in fact, it is very convenient to borrow other tools to unscrew without this.
<5> Don't underestimate the blade part, this blade is worth more than 2000 RMB! ! ! You read that right. In addition to the precise workmanship, its hardness reaches HRC 58±2. What concept? You need to know that the limit of hardness HRC is 60!
<6> This 2.5x magnifying glass has a lighting function. I personally tested it and it is very convenient. However, the appearance is made of plastic, which is still a grade lower than the cross-cutting device.
<7> The picture below is a real shot of 3M adhesive tape, which is sold both at home and abroad. I think the intention of TQC is also to guide users to do rigorous experiments with standard matching.
That’s the end of this issue. After reading the above introduction, do you still have any doubts about the CC1000 series cross-cutting device?
