German EPK company's McCourt coating Thickness Gauge can accurately measure the coating thickness on steel:
·Electroplating layer, electroplating nickel layer, phosphating film
· Paint, powder coating
·Plastic, rubber
MIKROTEST cladding Thickness Gauge, measuring all non-magnetic coatings on steel
Layer thickness (e.g. lacquer, powder coating, plastic, zinc, copper, tin and nickel). Fast, accurate and non-destructive measurement, MICROTEST has become a widely used special instrument for automatic measurement of coating thickness for more than 30 years. Germany's "know-how" shows that it has the highest level of magnetic cladding Thickness Gauges in terms of process technology and precision.
All instruments comply with DIN, ISO and ASTM standards. MIKROTEST operates fully automatically. It has very good features when used:
1. Automatic measurement will not cause misoperation
2. Easy to grasp and has extremely high precision
3. No need for calibration, setting and detection
4. Does not require batteries or other power sources
5. Automatically report the thickness reading
6. Use a non-destructive probe to measure at one point
7. Metal armor is suitable for outdoor frequent operation
8. Resistance to mechanical shock, acid and solvent corrosion
9. The balance device eliminates the influence of gravity, and can measure accurately in any direction and in the pipe.
From the table above, you can choose the most suitable model of MIKROTEST to solve your problems. MIKROTEST is easy to operate. When measuring, you only need to turn the thumbwheel forward to the end of the scale, set the probe on the measurement area, release the self-locking mechanism, and start automatic measurement. Once locked, MIKROTEST displays the correct value of the coating thickness in μm or mm directly on the scale. Operated according to the instructions, MIKROTEST can be used without interruption for many years, quality control for you.
