Using a taber abrasion Tester, using a standard rubber grinding wheel to wear the sample for a specified number of times under a certain gravity load, the test method to evaluate its abrasive performance by the quality of the outstanding wear is called the wear resistance test.
Before the test, use an analytical balance to accurately measure the mass of each sample. The wear wheel rotation speed of the abrasion Tester is generally 60r/min, and the maximum is 100r/min. The abrasion test time is the specified number of abrasion revolutions or until the substrate is exposed. During the opening process of the abrasIon Meter, the dust suction device should continuously suck away the medium debris from the surface of the sample. Finally, an analytical balance is used to accurately measure the mass of the sample after the abrasion resistance test. The result is expressed by the weight loss of the sample after the prescribed number of abrasion revolutions or by the number of abrasion revolutions when the substrate is just exposed.
