NUOVA SIMONELLI Coffee Grinder Instructions for Use
1. Technical parameters
2. Conditions of Use
This machine is only used to grind roasted coffee beans. The working ambient temperature is limited to -5°C~+50°C.
Users should pay attention to all safety matters and carry out regular maintenance. If there is any problem, please contact the maintenance personnel in time.
The machine can work continuously for 24 hours. The service life of each component is 10000 hours.
3. Safety Precautions
Do not touch the machine with wet.
Do not operate with bare feet.
Do not pull or pull the power cord.
Do not place the machine in a humid or direct sunlight environment.
Keep out of children's operation.
When cleaning or maintaining, please shut down and unplug the power supply first.
Do not rinse with water or detergent.
When the machine does not work normally, please shut down and contact professional maintenance personnel. Do not beat the machine.
When the machine is not in use, please shut down and unplug the power.
Do not block the cooling vents.
When the machine is working, do not put forks, spoons and other utensils into the bean bin.
Do not immerse the base or body in water.
When moving the machine, do not lift the bean bin. The bean bin should fit securely on the machine.
Do not let the motor run idle. REMEMBER: The automatic Grinder will not automatically shut off when the hopper is out of beans, which will overheat the motor.
If there is a foreign object in the motor, it should be shut down immediately.
Machines marked "termikalarm" are equipped with electrical devices to prevent overheating of the motor. When the device is working, do not force it on. should try
Troubleshoot and continue to use.
Repairs should only be carried out by qualified personnel using original spare parts.
4. machine installation
The Grinders of the MDU and MDX series need to install the bean bin, the method is as follows:
Insert the bean container into the container seat, adjust the position of the bean container so that the hole at the bottom is aligned with the screw hole on the back of the container seat, and tighten the nut.
5. operation method
After the machine is plugged in, close the feeding port at the bottom of the bean bin. Open the lid and add beans. Turn the switch to the ON position to open the feeding port.
Type A Grinder can be started and stopped automatically.
Turn the knob next to the bean bin to adjust the fineness of the powder. Clockwise to finer, counterclockwise to coarser. The knobs are marked.
The amount of powder can be adjusted by turning the knob at the bottom of the powder bin. Clockwise increases, counterclockwise decreases.
6. Cleaning and Maintenance
Unplug the power supply during cleaning and maintenance. Maintenance should be performed by professionals.
Remove the bean bin at least once a week and wipe off residue with a damp cloth. Clean the powder dispenser with a brush or damp cloth. Bean and powder residues will affect the ground coffee
coffee quality. The stand should also be wiped clean with a damp cloth.
In order to ensure that the machine can work normally, the flat grinding head should be replaced after grinding 500/600 kg of coffee beans; the cone grinding head should be replaced after grinding 800/900 kg
Coffee beans should be replaced afterward.
When not in use for a long time, please unplug the power supply and store the machine properly.
