1. Safety technology for coating production and construction
① Production, construction and operation should adhere to the principle of "safe production, everyone is responsible".
②Employees engaged in production and construction need to conduct education and training on safety technical regulations, protection and coating performance, construction supporting and other technical precautions before taking up their jobs. Nippon Paint.
③When entering the construction site, safety helmets, gloves, protective glasses and protective shoes must be worn, and safety belts must be worn when working at heights to prevent falling.
④The insulation protection of construction machinery and tools must be grounded and connected to zero according to relevant regulations, and a leakage protection switch must be installed to prevent accidents .
⑤ The lighting voltage of construction work shall not be higher than the safe voltage, and it is better to use portable battery charging lighting.
⑥ During climbing construction work, it is forbidden to wear hard-soled slippery shoes with spikes, and construction work is prohibited for those in poor physical condition.
⑦When working outdoors at high altitudes, it is necessary to hang eye-catching signs: to remind pedestrians to pay attention to safety, so as not to hurt or be hurt by others.
2. Safety protection for coating production and construction
①In the process of coating production and construction, it is necessary to strictly abide by the fire protection system, including static electricity, electrical sparks, impact sparks, spontaneous combustion, etc., remember to eliminate them during construction, and adequate fire extinguishers must be equipped. When using gasoline, solvents, paint strippers, etc., it is necessary to cut off the power supply. If a fire hazard is found, it should be removed in time.
② Cotton waste cloth used in construction operations should be soaked in water and disposed of properly to avoid spontaneous combustion and accidents.
③The construction site should have good ventilation conditions or temporary ventilation equipment.
④ After construction, hands can be washed with kerosene, washing powder, etc., and then washed with soap, and solvents should not be used to prevent solvent damage to the skin and poisoning. When necessary, wear protective shield and safety glasses and rubber protective gloves.
⑤Regular physical examination to prevent occupational diseases.
