Elcometer 456 Coating Thickness Gauge

All Elcometer 456 probes are fully interchangeable and are available in a large range of designs and scales to suit customers' specific application requirements.

	Straight probes - measure coatings on flat and curved surfaces
	Miniature probes - ideal for measuring edge coatings, narrow tube coatings or small surface area coatings
	Right Angle Probes - For Measuring Inaccessible Places
	PINIP™ probes – plug-in probes that convert a two-piece instrument into a one-piece instrument
	Distal Probe — Extended right-angle probe to reach places that are difficult to reach with general probes
	Scanning probes - these probes are equipped with replaceable probe covers - the user can take a single reading or scan a large surface area without damaging the probe
	Waterproof probe - closed design, use in deep water, even wearing diving gloves will not affect the use
	High temperature probe - for use on coatings at temperatures up to 250°C (480°F)
	Anodized probes - resistant to chemical solvents, ideal for use in anodizing environments
	Armored Probes - Probes come with heavy metal reinforced cables to reduce the risk of cable damage
	Soft Coating Probe - Large area surface probe for detecting soft covering materials (HVCA certified)
	Specialty Probes - These probes can be used to measure on specialty substrates such as graphite or plated components

Ferrous probes measure the thickness of non-magnetic coatings on ferromagnetic substrates. Elcometer 456 Ferrous instruments accept any ferrous probe. Non-ferrous probes measure the thickness of non-conductive coatings on non-ferrous metal substrates and the Elcometer 456 Non-Ferrous category instruments accept any non-ferrous probe. The dual-purpose FNF probe can be used for both ferrous and non-ferrous applications, with automatic matrix recognition. Elcometer 456 FNF category instruments accept all ferrous, non-ferrous and dual purpose FNF probes.

Elcometer probes have a maximum operating temperature of 80°C (176°F) except 150°C (300°F) for the two-piece ferrous probes and 250°C (480°F) for the high-temperature PINIP. The specified temperature is the substrate temperature and the duty cycle of the probe needs to be reduced to ensure a minimum temperature build-up within the probe.

All Elcometer probes are supplied with a certificate of examination and a set of calibration diaphragms suitable for the scale range of the probe.

Range 0.5: Range: 0-500μm / 0-20mils
Accuracy a :	±1-3% or ±2.5μm (±1-3% or ±0.1mil)
scope:	0-500μm (0-20mils)
Resolution:	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-500μm (0.1mil: 5-20mils)
Certificate:	• Certificate provided as standard

product description	part number	Minimum headroom	Minimum sample diameter b	convex diameter	concave radius
Iron-based (F)
Micro Probe - Straight, 45mm long	T456CFM3---A	6mm	3mm	1.9mm	6.5mm
Micro Probe - 90°, 45mm long	T456CFM3R90A	Clearance height: 16mm Width: 7mm
Micro Probe - 45°, 45mm long	T456CFM3R45A	Clearance height: 18mm Width: 7mm
Micro Probe - Straight, 150mm long	T456CFM3---C	6mm
Micro Probe - 90°, 150mm long	T456CFM3R90C	Clearance height: 16mm Width: 7mm
Micro Probe - 90°, 300mm long	T456CFM3R90D	净空高度: 16mm 宽度: 7mm
微型探头 - 45°, 300mm长	T456CFM3R45D	净空高度: 18mm 宽度: 7mm

非铁基 (N)
微型探头 - 直的, 45mm长	T456CNM3---A	6mm	4mm	6mm	8.5mm
微型探头 - 90°, 45mm长	T456CNM3R90A	净空高度: 16mm 宽度: 7mm
微型探头 - 直的, 150mm长	T456CNM3---C	6mm
微型探头 - 90°, 150mm长	T456CNM3R90C	净空高度: 16mm 宽度: 7mm
微型探头 - 90°, 400mm长	T456CNM3R90E	净空高度: 16mm 宽度: 7mm

非铁基 - 石墨 (N)
微型探头 - 90°,石墨, 45mm长	T456CNMG3R90A	净空高度: 16mm 宽度: 7mm	4mm	6mm	8.5mm
微型探头 - 90°,石墨, 150mm长	T456CNMG3R90C
微型探头 - 90°,石墨, 400mm长	T456CNMG3R90E

量程 1: 范围: 0-1500μm / 0-60mils
精确度ae:	±1-3% 或 ±2.5μm (±1-3% 或 ±0.1mil)
范围d:	0-1500μm (0-60mils)
分辨率:	0.1μm: 0-100μm (0.01mil: 0-5mils) 1μm: 100-1500μm (0.1mil: 5-60mils)
证书:	• 作为标准提供证书

产品描述c	部件编号	最小净空高度	最小样本直径b	凸面直径	凹面半径
铁基 (F)
直探头	T456CF1S	85mm	4mm	4mm	25mm
直探头, 密封	T456CF1E	85mm	4mm	4mm	25mm
扫描探头	T456CF1U	86mm	15mm	平坦表面	平坦表面
扫描探头, 铠装线	T456CF1UARM	140mm	15mm	平坦表面	平坦表面
直角探头	T456CF1R	28mm	4mm	4mm	25mm
微型探头 - 90°, 45mm长	T456CFM5R90A	净空高度: 16mm 宽度: 7mm	4mm	3mm	6.5mm
微型探头 - 90°, 45mm长, 密封	T456CFME5R90A
微型探头 - 90°, 45mm长, 2米线, 密封	T456CFME5R90A-2
PINIP™ 整体式探头	T456CF1P	170mm	4mm	4mm	60mm

非铁基 (N)
直探头	T456CN1S	85mm	4mm	10mm	10mm
直角探头	T456CN1R	28mm	4mm	10mm	14mm
微型探头 - 90°, 45mm (1.77”)长	T456CNM5R90A	净空高度: 16mm 宽度: 7mm	4mm	10mm	8.5mm
微型探头 - 90°, 150mm (5.90”)长	T456CNM5R90C
微型探头 - 90°, 400mm (15.7”)长	T456CNM5R90E
阳极氧化探头	T456CN1AS	100mm	4mm	10mm	14mm
PINIP™ 整体式探头	T456CN1P	180mm	4mm	10mm	50mm

铁基 & 非铁基 (FNF)
直探头	T456CFNF1S	88mm	F: 4mm N: 6mm	F: 4mm N: 26mm	12.5mm
直探头, 铠装线	T456CFNF1ARM	185mm	F: 4mm N: 6mm	F: 4mm N: 26mm	12.5mm
扫描探头	T456CFNF1U	89mm	15mm	平坦表面	平坦表面
直角探头	T456CFNF1R	38mm	F: 4mm N: 6mm	F: 4mm N: 26mm	12.5mm
PINIP™ 整体式探头	T456CFNF1P	180mm	F: 4mm N: 6mm	F: 4mm N: 26mm	65mm

量程 2: 范围: 0-5mm / 0-200mils
精确度ae:	±1-3% 或 ±20μm (±1-3% 或 ±1.0mil)
范围d:	0-5mm (0-200mils)
分辨率:	1μm: 0-1mm (0.1mil: 0-50mils) 10μm: 1-5mm (1.0mil: 50-200mils)
证书:	• 作为标准提供证书

产品描述c	部件编号	最小净空高度	最小样本直径b	凸面直径	凹面半径
铁基 (F)
直探头	T456CF2S	89mm	8mm	4mm	25mm
扫描探头	T456CF2U	90mm	15mm	平坦表面	平坦表面
直角探头	T456CF2R	32mm	8mm	4mm	25mm
铠装探头	T456CF2ARM	138mm	8mm	4mm	25mm
可伸缩探头 - 56-122cm长	T456CF2T	36mm	8mm	4mm	25mm
软涂层探头	T456CF2B	89mm	8mm	平坦表面	平坦表面
防水探头 - 1m线	T456CF2SW	138mm	8mm	4mm	40mm
防水探头 - 5m线	T456CF2SW-5
防水探头 - 15m线	T456CF2SW-15
防水探头 - 30m线	T456CF2SW-30
防水探头 - 50m线	T456CF2SW-50
防水探头 - 75m线	T456CF2SW-75
PINIP™ 整体式探头	T456CF2P	174mm	8mm	4mm	60mm
高温PINIP™ 探头 - 250°C	T456CF2PHT	174mm	8mm	4mm	60mm

非铁基 (N)
直探头	T456CN2S	88mm	14mm	100mm	150mm
PINIP™ 整体式探头	T456CN2P	185mm	14mm	100mm	150mm

量程 3: 范围: 0-13mm / 0-500mils
精确度a:	±1-3% 或 ±50μm (±1-3% 或 ±2.0mils)
范围:	0-13mm (0-500mils)
分辨率:	1μm: 0-2mm (0.1mil: 0-100mils) 10μm: 2-13mm (1.0mil: 100-500mils)
证书:	• 作为标准提供证书

产品描述c	部件编号	最小净空高度	最小样本直径b	凸面直径	凹面半径
铁基 (F)
直探头	T456CF3S	102mm	14mm	15mm	40mm
PINIP™ 整体式探头	T456CF3P	184mm	14mm	15mm	45mm

非铁基 (N)
直探头	T456CN3S	170mm	35mm	平坦表面	平坦表面

量程 FM7: 范围: 0.6-3.8mm / 25-150mils
精确度a:	±7.5% 或 ±114μm (±7.5% 或 ±4.5mils)
范围f:	0.60-3.8mm (25-150mils)
分辨率:	1μm: 0-1mm (0.1mil: 0-139.3mils) 10μm: 1-3.8mm (1.0mil: 39.4-150mils)
证书:	• 作为标准提供证书

产品描述c	部件编号	最小净空高度	最小样本直径b	凸面直径	凹面半径
铁基 (F)
微型探头 - 45°, 45mm长	T456CFM7R45A	20mm	6.5 mm	-	-

量程 6: 范围: F: 0-25mm / 0-980mils N: 0-30mm/ 0-1220mils
精确度a:	±1-3% 或 ±100μm (±1-3% 或 ±4.0mils)
范围:	F: 0-25mm (F: 0-980mils) N: 0-30mm (N: 0-1200mils)
分辨率:	10μm: 0-2mm (1mil: 0-100mils) 100μm: 2-30mm (10mils: 100-1200mils)
证书:	• 作为标准提供证书

产品描述c	部件编号	最小净空高度	最小样本直径b	凸面直径	凹面半径
铁基 (F)
直探头	T456CF6S	150mm	51 x 51mm²	35mm	170mm
直探头, 铠装线	T456CF6ARM	190mm

非铁基 (N)
直探头	T456CN6S	160mm	58mm	平坦表面	平坦表面
直探头, 铠装线	T456CN6ARM	200mm

量程 7: 范围: 0-31mm / 0-1220mils
精确度a:	±1-3% 或 ±100μm (±1-3% 或 ±4.0mils)
范围:	0-31mm (0-1220mils)
分辨率:	10μm: 0-2mm (1.0mil: 0-100mils) 100μm: 2-31mm (10mils:100-1220mils)
证书:	• 作为标准提供证书

产品描述c	部件编号	最小净空高度	最小样本直径b	凸面直径	凹面半径
铁基 (F)
直探头, 铠装线	T456CF7ARM	200mm	55 x 55mm²	40mm	170mm

a. 取较大者

b. FNF (F): FNF探头在 F 铁基模式 FNF (N): FNF探头在 N 非铁基模式

c. 探头长度从X测量至Y

Elcometer 456涂层测厚仪探头选型表配图60

d. 不带探头保护盖

e. 扫描探头用未涂布的基体样品校准

f. 仅适用于Elcometer 456 型号T 仪器

• Certificate provided as standard.

Guess you like it

Relevant knowledge