Micron-mesh comparison table

Micron-mesh comparison table:

The number of screen mesh refers to the number of screen holes, which is the number of holes per square inch. The larger the mesh number, the smaller the aperture. Generally speaking, mesh number × pore size (micron number) ≈ 15000 (the larger the mesh number, the smaller the value). For example, the 400-mesh sieve has a pore size of about 38 microns; the 500-mesh sieve has a pore size of about 25 microns. Due to the problem of opening rate, that is, because the thickness of the wire used in weaving the net is different, the standards of different countries are also different. At present, there are many standards such as American standards, British standards and Japanese standards, among which the British and American standards Similar to Japan, the difference is quite large. Most of our country uses the American standard, that is, it can be calculated by the formula given above.   

MeshMicron (μm)MeshMicron (μm)
28000100150
36700115125
44750120120
54000125115
63350130113
72800140109
82360150106
10170016096
12140017090
14118017586
16100018080
1888020075
2083023062
twenty four70024061
2860025058
3055027053
3250030048
3542532545
4038040038
4235550025
45325600twenty three
4830080018
50270100013
60250134010
6523020006.5
7021250002.6
8018080001.6
90160100001.3

Sieve mesh commonly used in my country - micron (μm) comparison table

Due to habit and convenience, our country uses the following screen mesh-micron comparison table in many industries.

MeshMicron (μm)MeshMicron (μm)
2.5792560246
3588065220
4459980198
53962100165
63327110150
7279418083
8236220074
9198125061
10165127053
12139732547
14116542533
1699150025
2083362520
twenty four70180015
27589125010
3249525005
3541762502
40350125001
MeshNumber of threadsDepth (μm)
27511032
26010533
25010035
2409536
2259038
2108541
2008043
1857547
1757049
1656553
1506058


NBCHAO E-shop