Electric constant temperature shaker product installation and commissioning
How to install and debug the electric constant temperature Incubator during its use? What should I pay attention to during the installation process? Here are some knowledge about this kind of aspects.
1. Be careful not to use force on the glass or bump the box during transportation. When the instrument is in normal working condition, if the door is opened for too long, the temperature inside the box will change temporarily after closing the door, which is a normal phenomenon.
2. After the electric constant temperature Incubator falls to the ground, it should be placed stably. If the ground is uneven, it should be corrected.
3. Do not use the instrument in direct sunlight or places with high temperature and humidity.
4. The equipment should be kept away from electromagnetic interference sources, and the grounding wire of the equipment should be effectively grounded.
5. When the equipment is in normal operation, the placement of the contents in the box should not affect the air circulation so as to ensure the uniform temperature in the box.
6. The power supply is AC220V50HZ. It is necessary to use a three-core socket above 16A and a reliable grounding wire. Do not use a two-core socket without authorization. Do not place the power cord close to the back, and do not let instruments or other objects press on the power cord, so as not to damage the power cord.
The products have been strictly tested before leaving the factory, and generally do not need to be corrected. If the environment during use is harsh and the ambient temperature exceeds the appropriate range, it will cause an error between the temperature display value and the actual temperature in the box. If it exceeds the range of technical indicators, you can refer to the temperature control Correct the operating instructions of the device as necessary.
