Technical Parameters
1. Speed control range: 20~1300r/min 2. Motor power: 150W
3. Motor torque: 900mN·M 4. Working voltage: AC100-230V
5. Chuck clamping range: ≤Φ13mm 6. Maximum stirring capacity (water): 30000ml
7. Applicable medium viscosity: 0-30000mpas 8. Dimensions: 320*220*770mm
9. Rotational speed display: LCD screen, uplink measured speed, downturn steering and set speed
10. Timing range: 0~9999min 11. Weight: 11kg
Packing List
One stirring head host; one bottom plate; one cross right-angle chuck; one main benchmark rod Φ16×720mm; one stirring head; one instruction manual; one certificate of conformity.
safe use
1. Turning the stirring head will be dangerous, pay attention to body, clothing and hair. At the same time prevent the stirring liquid from splashing.
2. As soon as the instrument is plugged in, it will enter the standby state, and press the ↑ and ↓ keys to set the speed. Click to change 10 revolutions, press to change to accelerate.
3. If the stirring needs to be reversed, press the ↑ key and hold it when it is stopped, and then press the M key. When the display shows -RS, release the M key, and then release the ↑ key, and the display shows -RS. For reverse, +RS for forward.
4. Timing setting, press and hold the M key when it is stopped, enter the timing state display screen up: TIME SET, down tim press ↑, ↓ key to set the stirring timing time (in minutes), press M again to exit the setting fixed state. If the timing time is set to 0, the stirrer will work without timing. After the timing time is set, it is always saved in the machine, and it is timed every time it is turned on. If you don't want to set the time to "0".
5. When the stirring load exceeds the power of the machine, the stirring will automatically shut down due to overload, and press the M key to enter the standby state. Press the M key again to restart.
