Pushen brand has several different types of flexibility Testers, including RTG putty flexibility Tester, QTY-32 cylindrical bending Tester, ZQ-II conical bending Tester, which are mainly used to measure the flexibility of paint film coating, Anti-cracking, bending resistance and other properties. The following is a beautiful picture appreciation of these bending Testers, which were professionally photographed by NBCHAO Mall.
QTY-32 Cylindrical Bending Tester
Pushen QTY-32 Cylindrical Bending Tester is used to test the ductility and adhesion of the paint film by bending the film layer of the metal substrate through cylinders with different diameters. Equipped with 2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 20, 25, 32 mm twelve steel rods of different diameters.
ZQ-II conical bending Tester
ZQ-II paint film cone shaft bending Tester uses different curvatures of the cone shaft to test the crack resistance or peeling performance of the coating when it is bent around the shaft under standard conditions. Its advantages are small size and light weight , Used in laboratories and construction sites for experiments.
RTG putty flexibility Tester
Pushen RTG Putty Flexibility Tester complies with GB/T1748 standard. Bend the sample to observe whether the putty coating film cracks or falls off, expressed in millimeters of the minimum diameter of the bending arc. It is suitable for measuring the flexibility of thick paint putty.
The above are several flexibility Testers of Pushen, and more product information can be found in NBCHAO Mall.
