The specific operation steps of Ronghua DJ-1 high-power magnetic stirrer are as follows:
Instructions
When using this high-power magnetic stirrer , please first check whether the random accessories are complete, put the beaker to be stirred in the middle of the stainless steel workbench, add the solution, put the stirring bar in the beaker solution, and then plug in the power supply of the instrument Plug, then turn on the power and turn on the power switch, the indicator light will start to work. The speed regulation is gradually adjusted from low speed to high speed. It is not allowed to start directly at high speed, so as to avoid the agitator being out of sync and causing beating. When not working, the power should be cut off. To ensure safety, please connect the ground wire when using it. The high-power magnetic stirrer should be kept clean and dry, and the solution is strictly prohibited from entering the machine to avoid damage to the machine.
Precautions
1. When you find that the stirring is jumping or not stirring, please cut off the power and check whether the bottom of the beaker is flat and whether the position is correct. At the same time, please measure whether the current voltage is between 220V±10V, otherwise the above situation will occur .
2. It can work continuously at medium speed, and it is better to use intermittently at high speed.
3. Please read this manual carefully before use for correct use.
