Ronghua DNP Series Electric Thermostatic Incubator Instruction Manual

Structure overview

The appearance of the electric constant temperature Incubator is vertical, the box body and the outer door are made of high-quality steel plates, the surface is sprayed, and the inner door is made of tempered glass. You can clearly observe the cultured objects in the box without opening the inner door. The working room is made of steel plate or stainless steel plate , The shelf can be easily moved, and the height of the shelf can be changed arbitrarily. A silicon rubber sealing ring is installed between the working room and the tempered glass inner door to ensure the sealing of the inner door and the working room. Three flat-plate heaters are installed on the left, right and bottom of the outer wall of the studio, and a small low-noise fan is installed on the top of the studio to blow the breeze to ensure the uniformity of temperature in the box. The room shell and the studio are filled with ultra-fine glass wool for heat insulation.

The power switch, power indicator light, and temperature controller are all set on the upper part of the Incubator. The temperature controller has high temperature control accuracy. The set temperature and the temperature in the box are both digitally displayed. The set temperature has a protection device and also has a tracking alarm. Function.

Instructions

1. Turn the power switch to "I", at this time the power indicator light is on, and there is a digital display on the temperature controller.

2. Temperature setting: Click the setting button: SP appears on the display screen, and then press the increase or decrease button until the desired value.

3. Time setting: Click the setting button: the display shows SP, then press to display ST, and then press the increase and decrease keys until the desired value. When setting, it can be shifted from one digit to tens digit, the setting speed is fast, and the maximum setting is 99 hours.

4. During the cultivation period, it is better not to open the glass inner door, especially not to open the inner door for a long time, so as not to affect the temperature, unless you put or take the items in the box.

5. Select the cultivation time according to the needs. After the cultivation, turn the power switch to "O". If you don't take out the items immediately, please don't open the door.

Precautions

1. The shell of the Incubator needs to be effectively grounded to ensure safe use.

2. The Incubator should not be placed in a room with good ventilation conditions, and no flammable and explosive materials can be placed around it.

3. Do not overcrowd the items in the box, and leave space.

4. The inside and outside of the box should be kept clean. If it is not used for a long time, it should be covered with a plastic dust cover and placed in a dry room.

5. It is normal to have an overshoot phenomenon every time you start to use it. After the temperature is stable, put the culture again.

Troubleshooting