The microcomputer intelligent binocular temperature control system of the electric heating constant temperature Drying Oven has temperature control protection, which is accurate and reliable. The working temperature can be set arbitrarily, and it has a deviation alarm function, and the air inlet can be switched freely for hot air circulation. Since the equipment is in a state of high temperature and constant temperature for a long time, the Forced Air Drying Oven needs more proper maintenance and maintenance. The specific method is as follows:
1. Before use, you need to pay attention to whether the power supply voltage used is consistent. When in use, the ground wire of the power socket needs to be grounded according to regulations.
2. Do not put flammable items in the drying box without explosion-proof device.
3. After each use of the electric heating constant temperature drying box, the power supply must be completely cut off, and the inside and outside of the box should always be kept clean. After cleaning, hang the corresponding sign.
4. Do not overcrowd the items in the box. It is necessary to leave a space for natural convection of the air, so that the moist air can escape quickly on the wind top.
5. Regularly check whether the silver contacts of the temperature regulator are hairy or uneven. If so, use fine gauze to smooth the contacts before use, and clean them with a cleaning cloth frequently to make them in good contact (note that they need to be cut off) power supply). Do not hit the metal pipe of the indoor temperature regulator so as not to affect the sensitivity.
6. When the electric constant temperature Drying Oven is powered on, do not touch the electrical parts in the space on the left side of the box with your hands or wipe it with a damp cloth and rinse it with water. The power supply should be cut off during maintenance.
7. The power cord should not be wrapped around metal objects, and should not be installed in high temperature or humid places to prevent rubber aging and leakage.
