installation steps:
1 Please read the "Viscometer Instruction Manual" carefully before using this device;
2 After the viscometer is installed in place, connect the connecting head and the connecting rod, and connect the other end of the connecting rod with the selected rotor, and then install the connecting head on the connecting screw of the viscometer;
3 Install the measuring cylinder on the measuring cylinder adjusting seat and fix , adjust the lifting knob of the viscometer to put the rotor into the measuring cylinder, and make the level on the measuring cylinder adjusting seat display the level through the level adjusting feet. If the user is equipped with a constant temperature water bath the circulating water can be directly connected to the interface on the side of the measuring cylinder to obtain a more accurate viscosity value;
4 Fill the measuring cylinder with about 10-20ml of the liquid to be tested, so that the liquid level is just at the liquid level mark of the rotor;
5 Set up the viscometer according to the "Viscometer Instruction Manual" to measure the viscosity of the liquid to be measured.
The structure of the small sample adapter device will be improved, please operate according to the actual content.
