There are two kinds of wire rod coaters, one is used for coating and proofing in the laboratory, and the other is used on the production line, which is called coating metering rod. There are at least 30 brands of large and small wire Bar Coaters at home and abroad, excluding the brands of unfamiliar manufacturers. This article is mainly to share the brand of wire rod coater that is widely used in the laboratory coating and proofing industry, and it is also a good reputation brand for users.
First, American RDS wire Bar Coater
The American RDS wire Bar Coater has a history of more than 80 years, and the red plastic head cover and plastic shell packaging have not changed. RDS wire rods have various processes such as wire-wound, formed, double-wound, open-ended, and light rods, among which the common ones are wire-wound and formed. Each process has hundreds of different coating thickness rod numbers. The wire winding process rod can be as small as the wire diameter is thinner than a hair, but it still has good wear resistance and is not easy to break the wire. According to the north-south tide for so many years The data shows that there are almost no broken wires under non-artificial conditions, and there is no problem that the wires of ordinary brands are easy to break. Not much to say, the real picture shows the quality.
Wound Wire Rod
Formed Wire Rod Coater
Second, Japanese OSP wire Bar Coater
The Japanese OSP wire rod coater is also a well-known extrusion process wire rod coater in CHINA. Its main extrusion molding process is favored by many users for its advantages of easy cleaning and continuous wire extrusion process. OSP wire rods also have dozens of models with different coating thicknesses, and each model has three wire rods with different lengths. The minimum coating width is 60mm, and there are also 250mm and 400mm.
Third, the British RK wire rod
The characteristic of the British RK wire rod coater is that different rod numbers have plastic handles of different colors, which can be scraped with one hand, and can also coat multiple samples at one time. RK wire rods only have ten different coating rod numbers, which are divided into long rods and short rods. RK wire rod is an imported high-end brand, and the price is a bit more expensive than OSP and RDS.
Users who use British RK wire rods will basically know the special coating and proofing table produced by RK - the embossing bed. The special material design makes the coating effect better.
Fourth, domestic brand wire Bar Coater
In the past, domestic wire rods used more wire-wound QXG models. However, wire-wound wire rods are relatively prone to broken wires and difficult to clean. With the development of technology, more and more extrusion-type wire rods are used. coating process. Generally, they are divided into long rods and short rods, with two coating widths of 240mm and 300mm.
1) CCT wire rod coater is a middle-end extrusion type wire rod coater brand.
2) Other domestic wire rods are mostly low-end brands, which are preferred by users who pursue practical discounts.
