The Q-SUN xenon arc Test Chamber is an important for products exposed to direct outdoor sunlight, sunlight through window panes, or indoor lighting environments. Q-SUN Test Chambers have various models and configurations, and you can choose the model you need according to your testing requirements.
Three basic models of xenon arc Testers are suitable for any laboratory: the Q-SUN Xe-1 benchtop flat panel Tester, the Q-SUN Xe-2 rotary drum Tester, and the Q-SUN Xe-3 high-capacity flat panel Tester. All full-featured weathering , colorfastness and lightfastness Test Chambers, meeting all major test standards.
Q-SUN xenon arc Test Chambers have been widely . It can be used for screening new materials, improving existing materials, or evaluating the impact of formulation changes on product durability .
Q-SUN Xe-1
Q-SUN Xe-1 is an economical, multi-functional, single- lamp, desktop flat xenon arc Test Chamber. This small Test Chamber is suitable for laboratories with limited budgets or infrequent testing needs . The size of the slide-out sample holder for the Q-SUN Xe-1 Test Chamber is 251mm × 457mm. The Xe-1 Test Chamber is easy to install and can be installed indoors directly without exhaust.
Q-SUN Xe-2
The Q-SUN Xe-2 xenon arc Test Chamber is equipped with a large capacity rotating sample holder. Typically used to comply with a small number of standards that have specific hardware requirements for test equipment. It can accommodate 31 standard samples with a size of 46mm x 122mm . Q-SUN Xe-2 is equipped with air-cooled lamps with lower cost, higher efficiency and easier maintenance than water-cooled lamps.
Q-SUN Xe-2 belongs to the multi-functional Test Chamber, which is the most reliable and easy-to-use drum type xenon lamp Test Chamber with simple structure.
Q-SUN Xe-3
The Q-SUN Xe-3 xenon lamp aging chamber is a full-featured, large-sized Test Chamber , but its price is extremely favorable. It is equipped with three xenon arc lamps and has a large sample capacity. The size of its sample holder is 451mm x 718mm, which is almost three times that of Xe-1, and it is suitable for exposure testing of larger three-dimensional parts .
