Today, more and more companies are beginning to contact the environmental testing equipment industry. In particular, the development of temperature and humidity testing chambers has enabled customers to have a wider range of choices. Questions raised by users during the inspection process are gradually increasing. One of the questions that impresses me is how to save energy in the temperature and humidity Test Chamber.
1. The user should be clear about the aging problem in terms of requirements, and the designer should not be confused by the high temperature range.
2. The insulation performance of the temperature and humidity Test Chamber needs to be good. In this case, work on the heat storage body is required. In fact, as long as it is a test box, the ring test company can do it, but some customers save the construction cost and the surrounding insulation maintenance structure, but this will cause heat loss during the operation of the equipment and increase the service life of the equipment . temperature. heating output.
3. The temperature and humidity Test Chamber needs to run continuously during the operation of the circulation fan. This is also a relatively large energy loss of the temperature and humidity Test Chamber during operation. However, the energy saving in this aspect is relatively simple, and the heating amount is the same. Who has higher energy efficiency if the overall wind turbine power is smaller
4. During operation, users need to minimize the number of door openings. If more doors are open, heat will be lost.
As long as the above points are completed, I believe that users will have a relatively energy-saving temperature and humidity Test Chamber when using it.
