Everyone should be familiar with the temperature and humidity Test Chamber. The editor often introduces some parameters of the equipment and some problems that everyone will encounter during the purchase or use process. Later, some users reported that if there is a problem with the humidity in the temperature and humidity test room, what should be done and what caused the humidity in the temperature and humidity test room to increase. Let's look at the users we want to know about.
1. The water pipe is blocked, causing the water in the Water Tank to enter the humidification tank, resulting in inaccurate humidity. Technicians need this technology to make door visits. However, in addition to long-term use, the cause of clogged water pipes may also be due to the water quality of the test water.
2. The humidification pipe is damaged, and the studio usually has a humidification pipe and a drain pipe. If one of the problems occurs, it will affect the humidity of the test, so it needs to be checked regularly, and the manufacturer should contact the problem immediately. .
3. The instrument is faulty, although many manufacturers say that the damage of the instrument will cause problems on the display screen of the test box, but this fault will not appear in the equipment we sell, because our control system is specially developed for foreign R&D teams The controller is also looking for imported controllers, so the possibility of problems will be lower than other manufacturers.
There are a few factors that can cause problems with humidity in a temperature and Humidity Chamber. Everyone needs to pay more attention when using equipment.
