Q-SUN Xenon Test Chamber Test Standards
AATCC TM16
Color fastness to light
This test method provides the general principles and procedures currently used to determine the colorfastness to light of textile materials.
AATCC TM169
Weatherability of Textiles: Xenon Light Exposure
This test method provides procedures for exposure of various textile materials, including coated fabrics and products made from them, using controlled test conditions in an artificial weathering apparatus.
ASTM C1257
Standard Test Method for Accelerated Weathering of Solvent-Release Sealants
This test method includes two laboratory accelerated exposure procedures to predict the effects of UV or UV/Visible radiation, heat and moisture on the adhesion of color, chalking, cracking and solvent release sealants.
ASTM C1442
Practice for Testing Sealants Using Artificial Weathering Equipment
This practice covers three types of laboratory weathering exposure procedures for evaluating the effects of actinic radiation, heat, and moisture on sealants.
ASTM C1519
Standard Test Method for Evaluating the Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
This test method covers methods for determining the durability of sealants based on their ability to maintain cyclic motion and maintain adhesion and cohesion after repeated exposure to laboratory accelerated weathering procedures.
ASTM C732
Standard Test Method for Artificial Weathering of Latex Sealants
This test method covers laboratory procedures for determining the effects of artificial weathering on the aging of latex sealants.
ASTM C734
Standard Test Method for Low Temperature Flexibility of Latex Sealants After Artificial Weathering
This test method covers a laboratory procedure for determining the low temperature flexibility of latex sealants after 500 hours of artificial weathering.
ASTM C793
Standard Test Method for Effect of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
This test method covers a laboratory procedure for determining the effects of accelerated weathering on cured-in-place elastomeric joint sealants (one-component and multi-component) in building structures.
ASTM D1148
Standard Test Method for Discoloration and Discoloration of Rubber from Ultraviolet (UV) and Heating of Light-Colored Surfaces
This test method covers techniques for evaluating the surface discoloration of white or light-colored vulcanized rubber that may occur when exposed to UV or UV/visible light from a specified source under controlled conditions of relative humidity, humidity, and temperature.
ASTM D1670
Standard test method for accelerated and exterior weathering failure endpoints of asphalt materials
This test method covers the use of a spark-generating device to determine failure due to rupture of bituminous material subjected to accelerated or outdoor weathering on a conductive backing.
ASTM D2565
Standard Method for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
This practice covers specific procedures and test conditions applicable to xenon arc exposure of plastics in accordance with Practices G151 and G155.
ASTM D3424
Standard Practice for Evaluating the Relative Lightfastness and Weatherfastness of Printed Matters
This standard describes procedures for determining the relative lightfastness and weatherfastness of prints under the following conditions, which include exposure to natural light or accelerated procedures in the laboratory.
ASTM D3451
Standard Guide for Testing Paint Powders and Powder Coatings
This guide covers the selection and use of procedures for testing coating powders and powder coatings. The test methods included are listed in Table 1. Where more than one test method is listed for the same characteristic, no attempt is made to show the superiority of one method over another. The choice of each method needs to be determined jointly by experience and the requirements of each case and agreement between buyer and seller.
ASTM D4101
Standard Specification for Polypropylene Injection and Extrusion Materials
This specification covers polypropylene materials suitable for injection molding and extrusion. Polymers consist of homopolymers, copolymers and elastomers with or without the addition of impact modifiers (ethylene propylene rubber, polyisobutylene rubber and butyl rubber), colorants, stabilizers, lubricants or enhancer.
ASTM D4303
Standard Test Method for Lightfastness of Colorants Used in Artists Materials
Four test methods for accelerating the effects of long-term interior lighting on artist materials are described.
ASTM D4355
Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in Xenon-Arc Type Apparatus
This test method covers the determination of the reduction in tensile strength of geotextiles through exposure to xenon arc radiation, moisture, and heat.
ASTM D4434
Standard specification for polyvinyl chloride sheet roofing
This specification covers flexible sheets made of poly(vinyl chloride) resin, the primary polymer used primarily in weather-exposed single-ply roofing membranes.
ASTM D4459
Standard Method for Xenon Arc Exposure of Plastics for Indoor Applications
This practice covers the specific practices and test conditions applicable to exposure of plastics in windowpane-filtered xenon-arc devices for the evaluation of the stability of plastics used in indoor applications in accordance with Practices G151 and G155.
ASTM D4637
Standard Specification for EPDM Sheets Used in Single-Ply Roofing Membranes
This specification covers flexible sheets made of ethylene-propylene-diene terpolymer (EPDM) intended for use in single-ply roofing membranes that are exposed to the weather.
ASTM D4798
Standard Practice for Accelerated Weathering Test Conditions and Procedures for Asphalt Materials (Xenon-Arc Method)
This practice covers the xenon arc exposure test conditions and procedures of Practices G151 and G155 for asphalt roofing and waterproofing materials.
ASTM D4811
用作屋顶防水板的未硫化（未固化）橡胶板的标准规范
本规范涵盖由EPDM（乙烯-丙烯-二烯三元共聚物）或CR（聚氯丁二烯）制成的未硫化（未固化）橡胶板，旨在用作暴露在天气中的防水屋顶防水板。
ASTM D5019
单层屋顶膜中使用的增强CSM（氯磺化聚乙烯）片材的标准规范
本规范涵盖由氯磺化聚乙烯（CSM）制成的增强型非硫化聚合物片材，旨在用作暴露于天气的单层屋顶膜。
ASTM D5071
氙弧灯装置中光降解塑料暴露的标准规范
该实践涵盖适用于According to实践G151和G155进行的可光降解塑料的氙弧曝光的特定程序和测试条件。
ASTM D5383
艺术技术人员目测确定艺术材料的耐光性的标准实践
该实践涵盖了一种方法，该方法用于将室内有色艺术品的标本暴露在通过封闭窗户的阳光下。
ASTM D5398
用户视觉评估艺术品材料耐光性的标准实践
该实践涵盖了一种方法，该方法用于将室内有色艺术品的标本暴露在通过封闭窗户的阳光下。
ASTM D5819
选择土工合成材料耐久性试验方法的测试方法的标准指南
本指南通过系统地确定可能会影响土工合成材料的施工后使用寿命的适当应用环境中的因素，来涵盖设计者/说明者。
ASTM D6083
屋面用液态丙烯酸涂料的标准.
本规范涵盖液体应用的水分散型丙烯酸乳胶弹性防护屋顶涂料。
ASTM D6551
氙弧曝光设备加速压敏胶带风化的标准实践
该实践描述了一种主要用于包装的压敏胶带暴露于实验室加速风化环境的环境。
ASTM D6577
工业防护涂料测试标准指南
本指南涵盖了用于测试工业防护涂料的测试方法和程序的选择和使用。
ASTM D6662
聚烯烃基塑料木材装饰板的标准规范
本规范涵盖用作室外住宅装饰面板的聚烯烃基塑料木材产品。
ASTM D6695
油漆及相关涂层的氙弧暴露标准方法
该实践涵盖了According to实践G151和G155进行的氙弧设备中涂层和相关产品的加速暴露测试的测试条件的选择。
ASTM D6878
热塑性聚烯烃基屋顶板的标准规范
本规范涵盖由热塑性聚烯烃（TPO）作为主要聚合物制成的柔性片材，旨在用于暴露于天气的单层屋面膜中。
ASTM D7356
使用氙弧曝光设备的汽车透明涂料加速酸蚀耐候性的标准测试方法
该测试方法涵盖了一种加速暴露测试，旨在模拟佛罗里达州杰克逊维尔暴露现场发生的酸雨导致的汽车透明涂料缺陷。
ASTM D750
使用人工风化设备的橡胶劣化的标准测试方法
该测试方法涵盖了在采用G151以及G152，G153，G154或G155进行硫化橡胶胶料暴露时适用的测试条件和程序的特定变化。
ASTM D7869
运输涂层增强光和水暴露的氙弧暴露测试的标准实践
该测试程序用于模拟在亚热带气候下，例如佛罗里达州南部，用于外部运输应用（例如，汽车）的涂料所承受的物理和环境应力。
ASTM D882
塑料薄板拉伸性能的标准测试方法
该测试方法涵盖了测定薄板和薄膜（厚度小于1.0毫米（0.04英寸））形式的塑料的拉伸性能。
ASTM D904
粘合剂样品暴露在人造光下的标准实践
该实践涵盖了使用荧光UV（参见方法A）或氙弧灯光源（至少有一个玻璃或透明粘合剂）的胶粘接头的紫外线（UV）老化（有水或无水）的基本原理和操作程序（参见方法B）。
ASTM D925
橡胶性能的标准测试方法-表面染色（接触，迁移和扩散）
这些测试方法涵盖了评估橡胶与另一种浅色表面接触或接近时可能引起的三种类型污染的技术。
ASTM F1164
评估加速老化与双轴应力结合的透明塑料的标准试验方法。
该测试方法涵盖了在压力容器/测试夹具引起的双轴应力状态下，暴露于环境条件（加速风化）下的透明塑料的电阻。
ASTM F1515
通过颜色变化测量弹性地板的光稳定性的标准测试方法
该测试方法提供了一种测量地板产品在一段时间内经受加速曝光时的颜色变化量的方法（地板产品的功能用途）。
ASTM F2366
使用氙弧光设备测定暴露于窗户过滤日光下的喷墨印刷品的相对耐光性的标准实践
该实践涵盖适用于According to实践G151和G155进行的喷墨介质印刷品的氙弧曝光的特定程序和测试条件。
ASTM G151
在使用实验室光源的加速测试设备中暴露非金属材料的实践
该做法提供了在使用实验室光源的加速测试设备中暴露非金属材料时要使用的一般程序。
ASTM G155
非金属材料暴露的氙弧灯设备操作规程
该实践涵盖了使用氙弧灯和水设备的基本原理和操作程序，该设备旨在重现材料在实际使用中暴露于日光（直射或通过窗户玻璃）和潮湿（如雨水或露水）时发生的风化效果。
GM 9125P
实验室加速暴露于汽车材料的程序
这些程序用于确定汽车材料在人造光源下的抗降解能力。它描述了暴露在阳光下的碳弧，氙弧，荧光紫外线和冷凝设备以及双碳弧中。
IEC 61345
光伏（PV）模块的紫外线测试
ISO 105-B02（EN）（DIN）
纺织品色牢度测试第B02部分：对人造光的色牢度：氙弧褪色灯测试
ISO 105-B04（EN）（DIN）
纺织品-色牢度测试-B04部分。耐人工老化色牢度：氙弧褪色灯测试
ISO 105-B06（EN）（DIN）
纺织品-色牢度测试-B06部分：高温下对人造光的色牢度和老化：氙弧褪色灯测试
ISO 105-B07（EN）（DIN）
纺织品-色牢度测试-B07部分：用人工汗液润湿的纺织品的耐光色牢度
ISO 105-B10（EN）（DIN）
纺织品-色牢度测试-B10部分：人工老化-过滤后的氙弧辐射
ISO 11341（EN）（DIN）
油漆和清漆-人工老化和暴露于人工辐射下-暴露于过滤的氙弧辐射下
ISO 12040
图形技术-印刷和印刷油墨-使用过滤的氙弧光评估耐光性
ISO 29664
塑料-人工老化，包括酸性沉积
ISO 4892-1（EN）（DIN）
塑料–暴露于实验室光源的方法–第1部分：一般指南
ISO 4892-2（EN）（DIN）
塑料-暴露于实验室光源的方法-第2部分：氙弧灯
SAE J2412
使用受控辐照度氙弧灯装置加速暴露汽车内饰件
此测试方法规定了用于加速辐照各种汽车内部装饰部件的受控辐照度氙弧灯设备的操作程序。
SAE J2527
基于性能的可控辐照氙弧灯设备加速暴露于汽车外饰材料的标准
该SAE标准规定了用于加速辐照各种外部汽车材料的受控辐照度氙弧设备的操作程序。
大众PV 1306
测定聚丙烯零件粘性的暴露测试
大众PV 3929
非金属材料，干旱热气候中的风化
Volkswagen PV 3930
Non-metallic materials, humid climates, hot climates
