For most users, constant temperature and humidity Test Chambers need to be very familiar, because these products are often used in environmental testing. Since the cost of the equipment is high, and no external equipment is required to reduce the service life of the product equipment, daily maintenance and transportation management are required.
Three damages were caused to the constant temperature and humidity Test Chamber. Specifically, it includes light, heat, and high humidity. These three factors are very important for product equipment. Any of them can quickly shorten the service life of the constant temperature and humidity Test Chamber.
light factor. The structure and light intensity of different products in the constant temperature and Humidity Chamber are different. For example, durable materials such as plastics, paints, etc., can withstand light without severe degradation. Therefore, it is necessary to analyze the material composition of the product equipment.
high temperature coefficient. When the ambient temperature increases due to high temperature, the intensity of light and the degree of damage will increase. There is no direct chemical reaction between temperature and light, but there is a subtle connection between them. Therefore, in the test of constant temperature and humidity Test Chamber products, it is necessary to master the accurate temperature range.
moisture factor. Generally, some moisture, rain and dew, etc. are caused by moisture factors, and the formation of dew moisture is the main factor of outdoor dew, and the harm is greater than that of rain, because it attaches to the material for a longer time, causing more serious moisture absorb. For example, wood coating removes the surface aging layer caused by rain wash and exposes the aged inner layer to sunlight for further aging.
