Precautions for use
When using the UV aging Test Chamber, sufficient water source (pure water) should be maintained.
2. During the experiment, please do not open the door to avoid experimental errors.
3. The sensors in the studio should not be seriously affected.
4. Non-professional operators should not use and operate the machine at will.
5. Operators are advised to wear protective glasses and sheaths. Since UV radiation can cause damage to humans (especially eyes), the operator should minimize UV radiation (exposure time should be less than 1 minute).
6. If the device failure cannot be ruled out, please contact our technical department as soon as possible.
7. When you stop using it for a long time. When using it again, you should carefully check the water source, power supply and its components, and restart the device after making sure it is correct.
use environment
1. Ambient temperature: 5 +32;
2. Ambient humidity: <85%;
3. The operating environment needs to be lower than room temperature 28 degrees and well ventilated.
4. Do not place things about 80 cm in front and back of the machine.
maintain
1. After the test, the water should be drained, and the studio and box should be wiped dry.
2. After use, close the plastic cover to prevent dust from entering. If there is dust, it should be removed in time.
3. When the equipment is not working, it should be kept dry and disconnected from the power supply.
