Utilize the density and concentration conversion formula (represented by a straight line: y = a + bx). With y as the concentration and x as the density, it can be obtained linearly by inversion. For example:
| concentration.(%) | Density.(g/cm3) 20°C | concentration.(%) | Density.(g/cm3) 20°C |
| 10 | 0.982 | 10.6 | 0.9842 |
| 10.1 | 0.9824 | 10.7 | 0.9845 |
| 10.2 | 0.9827 | 10.8 | 0.9849 |
| 10.3 | 0.9831 | 10.9 | 0.9852 |
| 10.4 | 0.9835 | 11 | 0.9855 |
| 10.5 | 0.9838 |
Use density and concentration conversion formulas (straight line representation: y = a + bx). For the above data, the conversion formula can be obtained as follows. With y as the concentration and x as the density, y = 283.21 x – 268.12 is obtained. The linear formula can be obtained by inverting linearity with available commercial software.
In terms of a straight line: y = 283.21 x –268.12. Please input the parameter of concentration E1: -268.12, the parameter input of E2: 283.21
XF-120YT Liquid Density Meter can test liquid density Baume degree concentration
Model XF-120YT
Density accuracy 0.001g/cm3
Baume degree 0.001Be
Maximum weighing 1200g
Minimum weighing 0.001g
Density range 0.001—99.999g/cm3
Baume degree range 0.001-100.00Be
The result shows density Baume degree concentration
Set the upper and lower limits of the density, the specific gravity of the specific gravity hammer, and the temperature compensation setting
Test Type Fluid Liquid Corrosive Liquid Viscous Liquid
Calibration method 100g single-key automatic calibration, distilled water verification result value
Output mode RS-232C standard communication interface, convenient for test data output and printing
Remarks Corrosive liquids need to buy corrosive accessories Viscous liquids need to buy stainless steel liquid components
