What safety protection measures should be taken in paint construction?

What safety protection measures should be taken during paint construction?

(l) Construction operators should be familiar with the performance of the paint used, construction procedures and safety systems. The labor protection system should be strictly implemented during construction.


(2) All labor protection products should be used properly. When spraying, wear tight work clothes, masks, gloves and protective glasses. Avoid paint contact with the skin and harmful gas directly into the respiratory system.


(3) The construction site should have good ventilation conditions. It is recommended to stand in the wind when operating. If construction is performed in a poorly ventilated place, ventilation equipment needs to be installed. When constructing in the cabin or basement, it is necessary to wear an oxygen mask. Several people should take turns to operate, and a special person should be watching at the mouth. Those who experience dizziness and nausea during construction should leave the construction site immediately, go outside to breathe fresh air and have a rest. In severe cases, they should be sent to the hospital for examination immediately.


(4) Safety belts should be worn when working at heights, and safety nets should be set up at dangerous places during construction. Double ladders should be tied with safety ropes, the angle between them should not exceed 6o°, and the feet of the ladders should be covered with rubber; the single ladder should be placed on the wall, and someone should support or fix the feet of the ladders; There are lifebuoys.


(5) In the workshops where paint is used or gasoline is used, open flames are not allowed, smoking is strictly prohibited, personnel wearing leather shoes with iron spikes are strictly prohibited from entering the workshop, and high-pressure lamps and electrical switches are strictly prohibited.


(6) The place where the oil is boiled should be far away from buildings, and each has fire-fighting equipment. There should be a special person responsible for boiling the oil, and the site should not be opened too high. After the oil is boiled, the fire should be extinguished immediately. If a fire is caused by boiling oil, it should be put out immediately with iron plates, sand or wet straw bags, and watering is strictly prohibited.


(7) After the construction is completed, the tools and residual materials should be cleaned up in time, and the paint bucket should be closed. Solvent buckets should be covered. The scraps and cloth ends from wiping paint and solvent should be disposed of in time.


(8) Operators should wash their hands with less solvent. It is recommended to expose the


NBCHAO E-shop
Relevant knowledge