The water quality of the ultrapure water machine in the laboratory meets the relevant laboratory standards, has no harm to the natural environment, is easy to operate, and has no pollution. Poor source water quality and careless daily maintenance will shorten the service life of the ultrapure water machine in advance. Therefore, when using the ultrapure water machine, daily maintenance work is required to effectively improve the efficiency of the ultrapure water machine.
1. Before using the ultrapure water machine each time, please open the three-way ball valve to connect to the water source, and then connect to the power supply at the back of the instrument before performing the water production operation. Because the booster pump needs to run under the condition of water, it is very easy to damage the pump due to dry running without water.
2. It is better to turn on the instrument for 10 minutes every day, turn on the water and power to run and rinse once, so that the instrument can run and let off the old water accumulated inside, so as to prevent microorganisms from contaminating the filter element and maintain the performance of the instrument and filter element. When the pure water is not used for a long time, all the reverse osmosis pure water in the pressure tank should be drained to prevent pollution.
3. Drain some water through the faucet before each water intake of the instrument, so as to avoid tap water standing still in the pipe network for too long, so that impurities such as water embroidery enter the primary filtration system, block the filter element and reduce the service life of the filter element.
4. The instrument is suitable for operation in a ventilated and dry environment; avoid violent vibration during the transportation of the instrument to prevent the UV lamp tube from being crushed and broken.
5. Before leaving get off work, please be sure to turn off the power of the ultrapure water machine and cut off the source of tap water.
6. When a fault occurs and needs to be repaired, please do not repair it by yourself, please contact the factory in time.
The above is an introduction to the daily maintenance of laboratory ultrapure water machines. At the same time, you should also pay attention to how to clean the ultrapure water machine, and do a good job of daily maintenance and cleaning of the equipment, which can effectively prolong the service life of the equipment and ensure the quality of the effluent water of the equipment.
