NBCHAO

A list of laboratory testing instruments for conventional [water-based paint]

Water-based paint is a kind of water-based paint, including insulating paint, metallic paint, environmental protection paint, epoxy zinc-rich primer, anti-corrosion paint and so on. With the deepening of society's requirements for environmental protection, water-based paint is favored by various industries for its unique environmental protection. From raw materials to finished products, water-based paints have to go through different stages of experimental testing. In order to adapt to different products and play a better protective role, there are different requirements for its performance.

The performance test of water-based paint includes adhesion, coating film, specific gravity, PH, viscosity, gloss, color difference, color, impact resistance, stirring and dispersion, drying, fineness, etc., which basically covers the routine performance test of paint.

The following is a list of instruments and equipment used in the process of water-based paint from production to sample test and testing compiled by NBCHAO.

thumbnailBrand model numbernameSpecifications
A list of conventional [water-based paint] laboratory testing equipment with picture 1Pusheen  HGQsingle edge scratcherThe number of teeth is 11 teeth, the distance between teeth is 1mm, 2mm, the handle material is hardwood, and the application standard GB/T 9286, ASTM D 3359
A list of conventional [water-based paint] laboratory testing equipment with picture 2Fangrui Instrument  NDJ-5S+RTDDigital ViscometerLCD display with backlight, measuring range 1~100000mPa·s, rotor specifications 1#, 2#, 3#, 4#, rotor speed 6/12/30/60rpm, reproducibility ±0.5%, measurement accuracy ±2% , power supply voltage 110V/60Hz, 220V/50Hz, one peripheral interface R232C communication interface, one temperature probe interface, one power jack, temperature probe RTD temperature probe, overall size 300*300*450mm, instrument weight 5kg, display information automatically displayed The maximum viscosity value that can be measured by the combination of the selected rotor and speed, the automatic scanning function can automatically prompt to give the appropriate rotor speed combination according to the viscosity value of the test sample
A list of conventional [water-based paint] laboratory testing equipment with Figure 3Yueping  NDJ-54 cups of coatingThe outflow time is 30~100s, the orifice diameter is 4mm, the error range is ±3%, the capacity is 100ml, the total height is 285mm, the cup body is made of stainless steel, the filter tip is made of stainless steel, the handle is made of stainless steel, the applicable standard GB/T 1723, and the ambient temperature is 25±1 ℃, certificate no
A list of conventional [water-based paint] laboratory testing equipment with Figure 4Qiwei  BNT-4TTu-4 viscometerOutflow time 0~150s, orifice diameter 4mm, capacity 100ml, cup body made of pure copper, applicable standard GB/T 1723, correction factor K=1±0.03
A list of laboratory testing instruments for conventional [water-based paint] with Figure 5Modern Environment  QBB 50mlspecific gravity cupThe volume of the cup is 50ml, the material is stainless steel, the applicable standard GB/T 6750-2007, the measurement temperature is 23±0.5℃
A list of conventional [water-based paint] laboratory testing equipment with Figure 6Kodida  CT-6023pH meterMeasurement parameter PH value, PH measurement range 0~14pH, PH measurement accuracy ±0.02pH, temperature measurement range 0~50℃, power supply 6V (1.5V*4pcs), overall size 188*38mm including electrodes, weight 82g (including electrodes) , display LCD, display size 20*27mm, resolution 0.01pH, pH calibration pH 6.86, pH 4.01, pH 9.18 three-point calibration, temperature display 0.1℃/℉, working temperature 0~50℃, built-in electrode configuration, temperature Measurement accuracy 0.5°C
A list of conventional [water-based paint] laboratory testing equipment with Figure 7RDS 22#Wire Bar CoaterThe production process is wire winding, the wet film thickness is 50.3μm, the total length is 400mm, the coating width is 300mm, the grip width is 50+50mm, and the material is 303 wear-resistant stainless steel
A list of conventional [water-based paint] laboratory testing equipment with Figure 8Pushhen  ZBQ 30-120umFour-sided Wet Film ApplicatorMultiple types, wet film thickness 30/60/90/120μm, coating width 80mm, material stainless steel, size 100*18*18mm, net weight 300g
A list of conventional [water-based paint] laboratory testing equipment with Figure 9Modern Environment  LG-1Sag TesterFilm thickness range 50-275μm, graduation value 25μm
A list of conventional [water-based paint] laboratory testing equipment with Figure 10Defelsko  PosiTector 6000 F90S1Coating Thickness Gauge

Measuring principle Magnetic induction, measuring range 0~1150μm, error range ±3%, resolution 0.1μm, probe F90S1 probe (90°miniature), statistical function average value, maximum value,

Minimum value, number of tests, standard deviation, no graphic function, power supply 3*AAA alkaline batteries, meet the standards ISO2178/2360/2808, PrENISO19840, ASTM

B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, etc., with calibration certificates, system language Chinese, English, display screen high resolution liquid

LCD display, data interface USB, supporting software, machine weight 140g (excluding battery), machine size 137*61*28mm, data storage 250 measured values, test ring

Environment ferrous metal substrate non-magnetic coating environment, Defelsko calibration standard STDS2, STDA2

A list of conventional [water-based paint] laboratory testing equipment with Figure 11Yuwen  EC-770Coating Thickness Gauge

Measuring principle Magnetic induction + eddy current, measuring range 0~1300μm, error range ±3%, resolution 1μm|0.01mm, minimum measuring surface Φ6mm, minimum curvature convex

1.5mm; concave 25mm, the thinnest substrate 0.5mm (F); 0.3mm (N), probe F and N integrated probe, statistical function average, maximum, minimum, standard deviation, figure

No display function, power supply 2*AAA1.5V battery, no calibration certificate, system language Chinese, display screen high-resolution LCD screen, data interface USB, supporting software yes,

The weight of the whole machine is 92g, the size of the whole machine is 110*53*24mm, the calibration mode is zero-point calibration, and supports up to 4-point calibration, data storage is a direct group (data is not saved) and four channels

Use groups (data can be saved), each group has separate statistics, calibration settings. , the unit displays μm/mm/mils, the alarm function users can set the upper and lower alarm limits, when an alarm occurs

, the LCD screen can display prompts, the working temperature is 0~40°C, the storage temperature is -20~70°C, and the upper and lower limit alarm function of the alarm function

A list of conventional [water-based paint] laboratory testing equipment with Figure 12Keshijia  WGG60-E4Gloss meter

The measurement angle is 60°, the measurement range is 0~199.5GU, the measurement spot is 18*36mm, the indication error is ±2GU, and the division value is 0.5GU, meeting the standards ISO2813, GB9754,

ASTMD2457, ASTMD523, GB/T13891, GB7706, GB8807, JJG696-2002, overall size 130*40*80mm, weight 430g, power supply

Built-in Ni-MH battery pack 4x1.2V, measuring port size 20*50mm, reading range 0~199.9GU, zero value error 0.5GU, stability 1GU, working hours and continuous use

Time > 48 hours, charging time 14~16h, charger power AC 187~242 (50Hz)

A list of conventional [water-based paint] laboratory testing equipment with Figure 13Raul/RAL  K7Color Card213 types of colors included Including 213 kinds of RAL classic series color fan-shaped Color Chart, fan-shaped Color Chart size 5.0x15.0cm, color sample size 2.0x5.0cm, color quantity per page 5 colors, type bright
A list of conventional [water-based paint] laboratory testing equipment with Figure 143nh  NR145Colorimeter

Illumination mode 45/0 (45 direction incidence/0 degree reception);, lighting source LED light source, sensor silicon photodiode, measuring aperture Φ8mm, color space

CIELAB, XYZ, LCh, color difference formula ΔE*ab, other chromaticity indicators/, observation angle CIE10°, measurement light source D65, display mode chromaticity value, color difference value/graph, pass/fail

Qualified results, color deviation, measurement time 1.5s, repeatability within Φ8mm/ΔE*ab0.08 (after the instrument is preheated and corrected, measure the average value of the whiteboard 30 times at intervals of 5s), inter-table difference

ΔE*ab<0.4, external dimensions 205*67*80mm, weight 400g, battery life Rechargeable lithium-ion battery 3.7V@3200mAh, lighting source life of more than 1.6 million for 5 years

Second measurement, display TFT true color 2.8inch@ (16:9), data interface USB, data storage 100 standard samples, 20000 samples, operating environment

0~40°C (32~104°F), storage environment -20~50°C (-4~122°F), PC software CQCS3 high-end quality management software, standard accessories power adapter, manual,

Quality management software (official website download), data cable, whiteboard box, wrist strap, optional accessories micro-printer, powder test box, in line with the standard CIENo.15, GB/T3978

A list of conventional [water-based paint] laboratory testing equipment with Figure 15National standard Color Chart  GSB05-1426-2001National standard Color ChartContains 83 colors, 1 color sample per page, packaging size 9.59cm*3.8cm, standard GB3181
A list of conventional [water-based paint] laboratory testing equipment with Figure 16Pushin  PS 2930/2black and white paperThe size is 142*250mm, the color style is white on the top and black on the bottom, the type of lamination is , the packaging specification is 100 sheets/pack, and the weight is 1.4kg
A list of conventional [water-based paint] laboratory testing equipment with Figure 17Lantai  HT-6510PPencil Hardness TesterLoad 500/750/1000g, no measurement certificate, material stainless steel, 13 standard pencils, standard pencil 6B-6H (13 pcs)
A list of conventional [water-based paint] laboratory testing equipment with Figure 18World Expo Albert  QCJ-100Paint film impactorThe impact height is 100cm, the sub-scale is 1cm, the drop weight is 1000g, the punch diameter is Φ8mm, the impact depth is 2mm, the hole diameter of the mold base is Φ15mm, the radius of curvature R2.5~3mm, meets the standard GB/T 1732-79, and the overall size is 250*140* 1330mm, the net weight of the instrument is 14kg, and the shipping weight is 23kg
A list of conventional [water-based paint] laboratory testing equipment with Figure 19Jingke  QTXPaint Film Elasticity TesterShaft length 50mm, test iron plate size thickness 0.2~0.3mm, size 20*100~150mm, magnifying glass four times magnifying glass, operating environment at 22±1°C, relative temperature not greater than 70%, shaft rod 1Φ15mm,  shaft Rod 2Φ10mm, shaft rod 3Φ5mm, shaft rod 4Φ4mm, shaft rod 53*10mm, radius of curvature 1.5mm, shaft rod  62*10mm, radius of curvature 1mm, shaft rod 71*10mm, radius of curvature 0.5mm
A list of conventional [water-based paint] laboratory testing equipment with Figure 20Kang Heng Instrument  101-0ASDigital display electric Forced Air Drying OvenTemperature control range RT+5~300℃, temperature fluctuation ±1%, accuracy ±1℃, studio size 350*350*350mm, studio material stainless steel, outer box material metal paint spraying, temperature controller microcomputer intelligence PID digital display, observation window, power supply voltage 220V, input power 0.8~1.6Kw, overall size 590*660*520mm
A list of conventional [water-based paint] laboratory testing equipment with Figure 21Modern environment  SFJ-750 (AC frequency conversion)Sanding, dispersing, mixing multi-purpose machineMotor power 750W, speed range 0~7500rpm, lifting stroke 240mm, processing capacity 1.25L, impeller diameter Φ50/60mm, power supply voltage 200-260V 50Hz/60Hz, overall size 450*420*550mm, main engine weight 35Kg
A list of conventional [water-based paint] laboratory testing equipment with Figure 22Shanghai Muxuan  XD-B400Experimental mixing sand mill disperser电机功率400W， 调速范围0~8000rpm， 升降行程260mm， 处理量0.2~5L， 外形尺寸450*500*750mm， 叶轮直径标配 50/60mm， 研磨头45/60mm， 升降方式电动
A list of conventional [water-based paint] laboratory testing equipment with Figure 23现代环境 XD-292调墨刀（大）刀长（cm）15， 手柄长（cm）13， 材质不锈铁
A list of conventional [water-based paint] laboratory testing equipment with Figure 24希玛 AR872D+红外线测温仪测温范围-50~1150℃， 精确度-50至32℃±5,-32℃-0℃±3,0-100℃±2， 分辨率0.1℃， 重复性±1℃|±1%， 物距比12:1 ， 发射率 0.1~1.0， 响应时间500ms ， 响应波长8~14μm， 工作温度0~40℃， 相对湿度10-90% RH 不冷凝， 存储温度-20~60℃， 电源 2*1.5V AAA电池， 产品尺寸220*134*60mm， 重量480g， 温度单位℃/℉， 数据锁定功能有， 激光定位功能有， 显示屏背光功 能有， 自动关机有， 电池寿命12h
A list of conventional [water-based paint] laboratory testing equipment with Figure 25天津天马 TD20002A电子天平称量范围2000g， 校准砝码1000g， 校准功能外校， 最小读数0.01， 重复性误差±0.03g， 准确度等级Ⅲ， 稳定时间≤5秒， 工作 条件5°C-40°C 50%RH-60%RH， 秤盘尺寸Φ125mm， 接口RS232， 外形尺寸290*185*80mm， 包装尺寸325*225*180mm， 毛重3.2kg， 电源～220V±10% 50/60Hz
A list of conventional [water-based paint] laboratory testing equipment with Figure 26复盛 FG40活塞机类型单极(风冷)活塞空压机， 压缩方式往复式， 排气压力0.8Mpa， 排气量360L/min， 缸径×杠数Φ80mm*2， 转速870rpm， 空 气接口1/2''， 外形尺寸1166*408*876mm， 重量150kg， 输入功率3kw
A list of conventional [water-based paint] laboratory testing equipment with Figure 27Modern environment  QXD-100 (single slot)Single groove scraper Fineness MeterScraper type single groove, scraper number 1, range 0~100μm, scale unit μm, scraper material stainless steel, scraper size 170*50*12mm, groove size 12.7*140mm, scraper material stainless steel, scraper size 70mm, min Degree value 5μm

The above is a list of conventional water-based paint testing instruments, and the specific model selection should be made according to the testing requirements of the laboratory. The application of water-based paint is already very popular, and there are more and more industries in which it is applied. The requirements for its performance and quality and the diversification of dimensions, so there are more and more testing items.

NBCHAO E-shop
Relevant knowledge
Products
©NBchao.Com