Marking paints are mainly used in road traffic construction. Compared with other varieties, marking paints are still tested on non-stick tire drying time, compressive strength, low temperature crack resistance, heating stability, freeze-thaw stability, etc. Ask for something.
| Mechanical Properties Testing Instruments - Flexibility | |
 | Yonglida QTY-32 Paint Film Cylindrical Bending Tester |
| Specification parameters: Shaft size 2/3/4/5/6/8/10/12/16/18/20/25/32mm, test plate thickness not greater than 1.0mm (tin plate), in line with the standard GB/T6742- 86. ISO1519-73, ASIMD522, DIN53152, conforming to the standard GB6742, ISO1519 | |
 | Modern Environment QTX Paint Film Flexibility Tester |
| Specification parameters: shaft size, shaft length 50mm, shaft 1Φ15mm, shaft 2Φ10mm, shaft 3Φ5mm, shaft 4Φ4mm, shaft 53*10mm, radius of curvature 1.5mm, shaft 62*10mm, radius of curvature 1mm, shaft Rod 71*10mm, radius of curvature 0.5mm | |
| Mechanical performance testing instrument - wear resistance | |
 | Rongjida JM-V Paint Film Abrasion Tester |
| Specification parameters: stepper motor parameter 2.5A 21kgcm, turntable speed 60/70/min, standard working size of grinding wheel Φ51.4×12.7mm, actual weight of load weight paint film 250/500/750/ wood 250g, load weight mark Weight paint film 500/750/1000/wood 500g, grinding wheel balance weight paint film 1/2/5/10/20g/wood 1/2/5g, overall size 220×280×254mm, weight 13kg | |
| Environmental testing equipment - temperature and humidity control | |
 | Yiheng LRH-150CL low temperature Incubator |
| Specification parameters: temperature control range -10~65°C, temperature resolution 0.1°C, temperature fluctuation high temperature ±0.5°C, low temperature ±1.0°C, power supply voltage AC 220V 50HZ, working environment temperature +5~35°C, input power 1300W, Inner tank size 550*405*670mm, external dimension 690*800*1410mm, loading bracket (standard configuration) 3pcs, timing range 1~9999min, loading bracket (maximum) 6pcs, volume 150L, net weight 180Kg, gross weight 224Kg , outer packing size 930*800*1730mm | |
| Raw material performance testing instrument-viscosity | |
 | Yonglida QNB-ISO-4 ISO outFlow Cup (including bracket) |
| Specification parameters: viscosity range 34~135cSt, orifice diameter 4mm, cup body made of aluminum alloy, filter tip made of stainless steel, applicable standards ISO 2431, GB/T 6753.4, no certificate | |
 | Nirun STM-2 Digital Stormer Viscometer |
| Specifications: Display mode digital display, measuring range 40~141KU, 32~1099g, 27~5274cP, unit display KU/g/cP, rotation speed 200rpm, repeatability ±0.5%FS, accuracy ±1%, power supply voltage 220V /50Hz, applicable standard ASTM D562, container size 1pint, 0.5pint, speed accuracy ±0.01rpm | |
 | Nirun SNB-AI+250 degree heater digital viscometer |
| Specification parameters: display mode digital display, measuring range 5~1000000mPa·s, rotor specifications 21#, 27#, 28#, 29#, rotor speed 0.1~200rpm, reproducibility ±0.5%, measurement accuracy ±1%, Power supply voltage AC100-240V, 50Hz/60Hz, DC17V1.2A, instrument weight 7kg, furnace body temperature range from room temperature to 250°C, outer packaging material five-layer cardboard, collection method continuous collection, capacity 300~400ml, capacity 400ml (self-made ), lifting system PE lifting system, bearing system ruby, torque material beryllium bronze, control system microcomputer, software system data acquisition, drawing, temperature probe RID temperature probe, inner packaging aluminum alloy, speed control method stepless speed change | |
| General laboratory equipment - mixing and dispersing | |
 | Anny AM500L-P High Power Electric Mixer |
| Specification parameters: rated voltage AC220V, rated frequency 50/60Hz, input power 810W, output power 500W, stirring shaft output peak torque 191.2 N.cm, working system S1 (continuous), operation control method speed control box, speed range 100 ~2500rpm, stepless speed regulation, stirring rod fixing method to turn the chuck, the maximum torque is 191N.cm, the clamping range of the turning chuck is Φ5~16mm, the stirring impeller is equipped with a spiral stirring impeller, the stirring capacity is 100L, and the medium is the largest Viscosity 100000mPa·s, allowable ambient temperature ≤40°C, allowable relative humidity ≤80%, external dimensions 660*450*1200mm, overall weight 30.0kg | |
| General Laboratory Equipment - Quality | |
 | Huazhi DTT-A1000 electronic balance |
| Specification parameters: Weighing range 1000g, minimum weighing value 0.01g, readability accuracy 0.01g, repeatability error ±0.01g, automatic internal calibration with calibration function, weighing pan size Φ133mm, data interface RS-232, large display LED interface Display and brightness are adjustable, the weighing pan is made of aluminum alloy, and the linearity error is ±0.02g | |
| Raw material performance testing instrument - fineness | |
 | Pushen PU-2414 Single Slot Fineness Gauge |
| Specification parameters: scraper type single slot, scraper number 1, range 0~150μm, scale unit μm, scraper size 170*50*15mm, scraper material stainless steel, groove width 12mm, graduation value 10μm | |
| General Laboratory Equipment - Temperature/Humidity | |
 | Flier TG54 Infrared Thermometer |
| Specifications: temperature range -30~650°C, accuracy ±1%, resolution 0.1°C, object distance ratio 24:1, adjustable emissivity, with 4 preset values and custom options, response time ≤ 150ms, response wavelength 5~14μm, laser type single laser pointer pointing to the center of the measurement point, class 1, display 1.4” TFT LCD (128x128 pixels), power supply 3 AAA alkaline batteries, protection class IP56 | |
| Raw material performance testing instrument - density | |
 | Modern Environment QBB 100ml Specific Gravity Cup |
| Specification parameters: the volume of the cup is 100ml, the material is stainless steel, the applicable standard GB/T 6750-2007, the measurement temperature is 23±0.5℃ | |
| Film making and proofing equipment- Film making | |
 | RDS 34# 3/8" Coating stick 3/8" |
| Specification parameters: production process wire winding type, wet film thickness 77.7μm, diameter 9.52mm, total length 400mm, coating width 300mm, hand grip width 50+50mm, material stainless steel, steel wire diameter 0.86mm | |
 | RDS 28# 3/8" Coating rod 3/8" |
| Specification parameters: production process wire winding type, wet film thickness 64.0μm, diameter 9.52mm, total length 400mm, coating width 300mm, hand grip width 50+50mm, material stainless steel, steel wire diameter 0.71mm | |
 | RDS 18# 3/8" Coating stick 3/8" |
| Specification parameters: production process wire winding type, wet film thickness 41.1μm, diameter 9.52mm, total length 400mm, coating width 300mm, hand grip width 50+50mm, material stainless steel, steel wire diameter 0.46mm | |
 | RDS 10# 3/8" 涂膜棒 3/8" |
| 规格参数：生产工艺绕丝式， 湿膜厚度22.9μm， 直径9.52mm， 总长400mm， 涂布宽度300mm， 手握宽度50+50mm， 材质不锈钢， 钢丝直径0.25mm | |
 | RDS 6# 3/8" 涂膜棒 3/8" |
| 规格参数：湿膜厚度13.7μm， 生产工艺绕丝式， 直径9.52mm， 总长400mm， 涂布宽度300mm， 手握宽度50+50mm， 材质不锈钢， 钢丝直径0.15mm | |
 | 普申 ZBQ100/200/300/400 湿膜制备器 |
| 规格参数：类型多面， 湿膜厚度100/200/300/400μm， 涂布宽度80mm， 材质硬质不锈钢， 尺寸100*18*18mm， 净重300g | |
| 制膜打样仪器 - 喷涂 | |
 | 宝丽 R-71-G18 喷枪 |
| 规格参数：涂料供给方式重力式， 喷嘴口径1.8mm， 喷涂距离200mm， 空气使用量250L/min， 涂料喷出量260ml/min， 喷涂空气压力2.5-3.0 (0.24-0.29)kg/cm²(Mpa)， 喷幅210mm， 喷壶容量400c.c， 空气接口1/4PF， 空气帽材质铜 ， 喷嘴材质不锈钢热处理， 枪针材质不锈钢热处理， 雾化效果高雾化， 重量496g， 用途油性涂料 | |
| 制膜打样仪器 - 干燥时间 | |
 | 永利达 QGS 漆膜干燥时间测定器 |
| 规格参数：试验器重量200g， 砝码底面积1cm²， 执行标准GB/T 1728-89 | |
 | 精科 BZT 不沾胎时间测定仪 |
| 规格参数：轮胎尺寸Ø241±6mm， 仪器重量15.8±0.2kg | |
| 物理性能检测仪器 - 厚度 | |
 | Defelsko PosiTector 6000 FS1 涂层测厚仪 |
| 规格参数：测量原理磁感应， 测量范围0~1500μm， 误差范围±1%， 分辨率0.1μm， 探头FS1探头(通用)， 统计功能平均值、最大值、最小值、测试次数、标准偏差， 图示功能无， 电源3*AAA碱性电池， 满足标准ISO 2178/2360/2808、PrEN ISO 19840、ASTM B499/D1186/D1400/D7091/E376/G12、BS3900-C5、SSPC-PA2等， 校准证书有， 系统语言中文、英文， 显示屏幕液晶显示屏， 数据接口USB， 配套软件有， 整机重量140g(不含电池)， 整机尺寸137*61*28mm， 数据存储250个测量值， 测试环境铁质金属底材 非磁性涂层环境 | |
| 物理性能检测仪器 - 颜色 | |
 | 3nh NS808 交通路标测量模块分光测色仪 |
| 规格参数：照明方式45/0(45环形均匀照明0°接收);， 传感器硅光电二极管， 反射率测定范围0~200%， 照明光源组合LED光源， 测量时间1.5s， 测量口径Φ8mm， 重复性分光反射率：标准偏差0.1%以内（400~700nm：0.2%以内）： 色度值：ΔE*ab 0.04以内（校正后,以间隔5s测量白板30次平均值）， 操作语言中文、英文， 数据接口USB/TTL打印串口， 观察角度CIE 2°/10°， 测量光源D65,A,C,D50,D55,D75,F2,F6,F7,F8,F10,F11,F12， 色差公式ΔE*ab,ΔE*uv,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*00， 数据储存标样1000条，试样10000条， 电源电压锂电池，8小时内5000次， 显示模式光谱图/数据，样品色度值，色差值/图，合格/不合格结果，颜色偏向，颜色仿真， 操作环境0~40℃（32~104°F）， 存储环境-20~50℃（-4~122°F）， 外形尺寸90*77*230mm， 仪器重量约600g， 台间差ΔE*ab<0.2， 显示屏TFT 真彩 3.5inch，电容触摸屏， 波长范围400~700nm， 波长间隔10nm， 可选附件多功能测试组件（液体、粉末、颗粒等）,微型打印机,粉末测试盒， 其它色度指标WI(ASTM E313，CIE/ISO,AATCC,Hunter)， YI(ASTM D1925，ASTM 313), 同色异谱指数Mt， 粘色牢度,变色牢度,力份,遮盖度， 颜色空间CIE LAB,XYZ,Yxy,LCh,CIE LUV | |
| 物理性能检测仪器 - 遮盖力 | |
 | LENETA Form M12 喷涂贴卡 |
| 规格参数：规格尺寸25*25mm， 颜色样式黑白格， 包装规格125张（含2000格）， 应用标准D4941， 应用领域油漆/油墨， 重量0.91kg | |
| Mechanical Properties Testing Instruments - Adhesion | |
 | Jingke QFH 6-tooth cross-hatch adhesion Tester |
| Specification parameters: the number of teeth is 6 teeth, the distance between teeth is 1mm, 2mm, 3mm, and the application standard is ISO2409-1974 | |
