Tips on how to use
1. Put the machine in a horizontal position.
2. Connect the power cord and turn on the power switch.
3. Set the counter and set the required number of tests.
4. During the test, open the drum cover (if the position is not directly above, turn on the power first, press the start button "START" to let the drum cover turn to the top, then press the stop button "STOP"; then put the test piece into the drum inside, close the canister lid).
5. Press the start button "START", and the drum starts to rotate.
6. After the counter reaches the set number of times, it will stop automatically.
7. Take out the test piece and check the damage degree of the test piece.
maintenance
1. Pay attention to each button, press lightly and release lightly.
2. When the machine is working, the power supply should be grounded with three plugs, and the power supply should be cut off when it is not working.
3. The machine should be placed in the laboratory, and the ground should be kept dry and flat.
4. After the test, the test piece in the drum should be taken as the same; keep the inside of the drum clean.
