Operating Instructions Test Preparation
1. Through the level, adjust the position of the feet around to adjust the platform to a horizontal state
2. Rotate the five-star nut to adjust the angle of the test plane to the required test angle
3. Paste the tape under test on the test plane
4. Select the steel balls to be tested, take the steel balls from the largest number, and let them roll down freely in order, and record the number of the balls that stick to the test piece for more than 5 seconds. As the product tape initial tack value.
5. After the test, remove the sample and clean the machine.
maintenance matters
1. The instrument needs to be placed on a stable table before use.
2. It is not allowed to move the machine during use;
3. Select the corresponding power supply voltage, not too high, to avoid burning out the device;
4. When the instrument is abnormal, please contact us for timely processing;
5. The machine needs to have a good ventilation environment when it is working.
6. For each component of the button mechanism, please lubricate the mechanical part in time;
7. After each test, clean up the machine and keep the machine clean;
8. It must be wiped with a dry cloth, not a wet cloth.
