Is there a free trial for RDS5# wire Bar Coater? How to use the film stick, the substrate I use is PI with a size of 4cm*4cm, is it ok? Can this wire Bar Coater be used to draw down an even coating on glass surfaces? Users often come to Xiaochao with questions. In this issue, NBCHAO also complains about this 3/8" coating stick made in the United States.
The technical parameters of the mayer-rod are like the measurements of a person. Xiaochao is too lazy to waste his words and directly exposes the table
| Production Process | Wire wound |
| wet film thickness | 11.4μm |
| diameter | 9.5mm |
| total length | 400mm |
| Coating width | 300mm |
| Hand width | 50+50mm |
| material | Stainless steel |
| Wire diameter | 0.13mm |
Table name: 5# 3/8" coating rod 3/8" specification parameter table
According to the big data of the northern and southern tides, similar specifications include RK's KHC.10.2 coating stick, RK's KHC.11.2 coating stick and OSP's OSP-12/400 coating stick L400, etc. The technical comparison can be directly compared through the north and south tide system , 5# 3/8" This coating stick 3/8" is the mainstream model of ink scraping, Mayer wire winding principle, wire diameter 0.13mm, wet film control of about 11 microns, suitable for new releases in 2020 In the GB/T13217.1 standard, the application of silk rods in the inspection of ink color tinting strength.
In the past year, 2934 users have learned about Beichao in detail. Brothers and sisters of Xiaochao also took a set of 5# 3/8" physical pictures for everyone, let's enjoy together!
So, is this RDS coating rod 3/8" good or not, and what is the quality? Xiaochao is not stupid. Brothers and sisters say that existence is useful. Different conditions and environments use different mayer-rods, and the right one is good. Also remember that 5# 3/8" has no warranty period, including stainless steel rod X1 and transparent packaging hose X1, don't say I didn't tell you!
