GB/T36650 Optical Fiber Coloring Ink Performance Testing Scheme [With Instrument Parameters]

The GB/T36650 standard stipulates the performance requirements and test methods of optical fiber coloring inks, mainly for UV-cured light coloring inks. In the standard, there are corresponding requirements in terms of appearance, color, physical and chemical properties, compatibility, high-low temperature performance, solvent resistance of the colored layer, and environmental protection.

The physical and chemical properties include elongation at break, tensile strength, curing rate, thermal stability, viscosity, density, fineness, etc.

According to the original provisions of the GB/T36650 standard, this issue of NBCHAO has sorted out a specific testing plan for the performance testing of light coloring inks, with detailed technical parameters of testing instruments.

Membrane Proofing- Membrane
	Pushen ZBQ 30-120um four-sided Wet Film Applicator
	Specifications: multiple types, wet film thickness 30/60/90/120μm, coating width 80mm, material stainless steel, size 100*18*18mm, net weight 300g
Mechanical Properties - Abrasion Resistance
	ASR-8507 ink decolorization test machine
	Specification parameters: reciprocating friction mode, friction contact surface, number of grinding heads 1, friction load 2lb/4lb, friction stroke 60mm, friction area 50*156mm, power supply voltage AC 220V 50Hz 1A, overall size 263*230*350mm, weight 15kg, meet the standards GB7706, JIS5701, ISO9000, LED display of operation mode, sample size 220*60mm, adjustable friction frequency and speed, machine power 40W, automatic stop when the number of times is set 0~999999, friction stroke 60mm
Mechanical Properties - Tensile Compression
	ASR-1021 (10KG) touch screen single column tensile strength testing machine
	规格参数：容量选择10KG， 测量精度±1%， 力值解析度1/200000， 试验速度范围0~300mm/min， 有效行程600mm， 试验空间120mm， 力值单位kgf、gf、N、kN、lbf， 应力单位MPa、kPa、kgf/cm2、lbf/in2， 停机方式上、下限安全设定，试件断点感测， 结果输出微型打印机， 动力系统调速电机， 选购配置拉力夹具（常规）， 机台重量约40kg， 电源电压1PH、AC220V、50/60Hz
环境测试 - 调温调湿
	博珍 GDW2005 高低温试验箱
	规格参数：控温范围-20~130℃， 温度波动度≤±0.5℃， 温度均匀度≤+2℃， 输入功率2kw， 电源电压220V/50HZ， 工作室尺寸400*350*400mm， 外形尺寸820*700*1380mm， 工作室材质304不锈钢， 外箱材质冷轧铁板喷涂（可选择定制316L不锈钢）
原料性能检测 - 粘度
	精天 NDJ-5S+L0 数显旋转式粘度计
	规格参数：测量范围1~100000mPa·s， 转子规格L0、L1、 L2、L3、L4 号转子各1件， 重现性±0.5%F.S， 测量精度±1%F.S， 电源电压专用电源适配器 （输入100～240V   50～60Hz）， 转子转速0.3/0.6/1.5/3/6/12/30/60rpm， 显示信息液晶屏可显示粘度、转速、百分计扭矩、转子编号及所选转子在当前转速下可测的最大粘度值等， 转速控制方式八档转速
物理性能 - 颜色
	彩谱 CR30 分光色宝
	Specification parameters: measurement structure 45°/0, measurement indicators 1RGB, Hex, Lab, LCh, HSB, LRV, spectral reflectance, HunterLab, CIE-Luv, XYZ, Yxy, color difference (OE* ab, E*cmc, OE *94,0E*00), measurement index 2 whiteness (ASTM E313-00, ASTM E313-73, CIE/ISO, AATCC, Hunter, TaubeBerger-Stensby), yellowness (ASTM D1925, ASTM E313-00, ASTM E313 -73), measurement index 3 blackness (My, dM), staining fastness, color fastness, Tint (ASTM E313-00), color density CMYK (A, T, E, M), metamerism index Milm , Munsell, hiding power, strength (dye strength, coloring power), lighting source LED (full-band balanced LED light source), measuring aperture 4mm, wavelength interval 10nm, wavelength range 400nm- 700nm, short-term repeatability △E*00 ≤0.05, inter-unit difference △E*00<0.4, measurement accuracy 0.01, measurement time 1.0s, interface USB, Bluetooth, light source conditions A, B, C, D50, D55, D65, D75, F1, F2, F3, F4 ,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30,U35,DLF,NBF,TL83,TL84, field of view 2°, 10°, screen IPS full color screen (135*240, 1.14inch), the battery capacity can be continuously measured for 10,000 times on a single full charge, language Chinese, English, calibration and automatic calibration, software support Andriod, IOS, WeChat applet, Windows, weight about 75g, volume diameter: 33mm, height: 84mm, Store APP mass inventory
Raw material performance testing - fineness
	Modern environment QXD-15 (single groove) single groove scraper Fineness Meter
	Specification parameters: scraper type single slot, scraper number 1, range 0~15μm, scale unit μm, scraper material stainless steel, scraper size 170*50*12mm, groove size 12.7*140mm, scraper material stainless steel, scraper size 70mm, applicable standards GB/T 1724, GB/T 13217.3, ISO 1524, ASTM D1210, graduation value 0.75μm
Physical Properties - Gloss
	An Miao AL-162 Precision Light Meter
	Specification parameters: Measuring range 0~50000 LUX or 0~5000 FC, resolution 1, accuracy ±5%n+5d, operating environment temperature 0~50 ℃; humidity <90%RH, power supply 4X1.5v AAA 7# battery, The size of the host is 140*70*30mm, the weight of the instrument is 130g (excluding batteries), and the size of the sensor is 53*53*17mm
Raw Material Performance Testing - Density
	Pushen QBB-50ml paint specific gravity cup
	Specification parameters: the volume of the cup is 50ml, the material is stainless steel, and the applicable standard GBT21862, IS0 2811

The above is the specific instrument plan for performance testing of optical fiber coloring ink specified in the GB/T36650 standard, which provides reference for the users of the northern and southern tides. About the GB/T36650 standard, you can enter the standard library for reading.