Architectural coatings need to be tested for the thickness of the coating during the construction process to the acceptance, to avoid the coating thickness being too thin, the service life is not long, the coating thickness is too thick to waste costs and even cause poor adhesion of the coating, so it is necessary to check frequently at each stage Conduct a coating thickness test.
So how to choose a coating Thickness Gauge? It is mainly selected according to the thickness of the coating to be tested, whether the substrate to be tested is magnetic metal or non-magnetic metal or non-metal, as well as the accuracy requirements and the environment to be tested. NBCHAO provides medium, high-low-end coating Thickness Gauges. This issue mainly sorts out the coating Thickness Gauges purchased by customers in the architectural coatings industry.
The following is the statistics of NBCHAO Mall, the brands and models of coating Thickness Gauges that have been purchased in the architectural coatings industry, which can provide reference for users in new industries!
| model | brand | Range |
| PosiTector 6000 FNS3 | american defelsko | 0~1500μm |
| CM8822 | Rantai | 0~1000μm |
| PosiTector 6000 F1 | american defelsko | 0~1500μm |
| AC-110A | An Miao | 0~1250μm |
| More coating Thickness Gauge selection: https://www.nbchao.com/a13/ | ||
The above table is some coating Thickness Gauges purchased by customers in the architectural coatings industry. It is for reference only. Which brand and model to choose depends on the actual test situation and budget. If you don't know how to choose the type, you can use the Thickness Gauge selection tool of Beichao.
