Temperature and Humidity Chamber
This type of environmental climate Test Chamber is mainly used for experiments related to climate factors such as temperature, humidity, and light. According to the different requirements of the test, it can be divided into several types.
1. Temperature and humidity Test Chamber
The temperature and humidity Test Chamber mainly meets the temperature range of -70°C-150°C, the humidity range of 20-98%RH, the main temperature fluctuation range is about ±0.5°C/±2°C, and the temperature change rate is about 1.0-3.0°C/Min; capacity It can be freely adjusted between 50 and 2000 liters. If there is a demand that exceeds this capacity, a walk-in Test Chamber should be considered.
2. Temperature Test Chamber
The main function of the high-low Temperature Test Chamber is also used to test the parameter changes of different samples in high temperature, low temperature, alternating temperature and other environments. The difference between the high-low Temperature Test Chamber and the temperature and humidity Test Chamber is that it does not have its own humidity change function, and only tests the temperature and humidity changes related to the test needs.
3. Humidity Test Chamber
The humidity Test Chamber can simulate a specific humidity environment for testing the performance of samples under humidity conditions.
4. Thermal Shock Test Chamber
The thermal shock Test Chamber is divided into the second zone and the third zone. The sample is placed in the inner cavity of the thermal shock Test Chamber, and the fan is used to send the wind into it for heating or cooling. As a way of testing, the sample is in the process of rapid temperature change. Changes caused by the impact of cold and heat shocks.
5. IP Test Chamber
According to the requirements of the IEC60529 standard, the equipment with IP protection level is mainly simulated in the natural environment of sand, dust and rain, and another erosion test is carried out on the equipment shell. Therefore, the IP protection level of the environmental climate Test Chamber can be divided into two categories.
6. IPX56 dustproof test box
Dustproof Test Chambers are also IP protection test equipment. According to the definition of industry standards, there are usually six grades of IP1X, IP2X, IP3X, IP4X, IP5X, and IP6X; among these six grades, the dustproof test is mainly applicable to IP5X, IP6X, commonly known as IP56X dustproof test box; IPX56 dustproof test box meets the sand and dust test requirements of level 5 and level 6 in the IEC60529 standard, and is used to test the use of products in sand and dust environments and anti-erosion conditions.
