standard
GB12831-86 Artificial weathering (xenon lamp) aging test method for vulcanized rubber
GB/T1644.2-1999 Plastic Laboratory Light Source Irradiation Test Method (Part 2: Arc Xenon Lamp)
GB/T8427-89 Tests for color fastness of textiles Color fastness to xenon arc to artificial light
GB/T8430-98 Tests for color fastness of textiles Color fastness to xenon arc to artificial light
GB/T1865-97 Paints, varnishes, artificial weathering and artificial radiation exposure (filtered xenon arc radiation)
GB/T16991-97 Tests for color fastness of textiles Color fastness to high temperature and light: xenon lamp
GB/T5137.3-96 Test methods for radiation resistance, high temperature resistance, humidity resistance, combustion resistance and simulated climate resistance of automotive safety glass
GB/T16259-96 Artificial climate accelerated color aging test method for colored building materials.
GB/T2423.24-95 Environmental testing for electrical and electronic products Part 2: Test methods, Test SQ: Simulation of ground solar radiation
ASTM D1149 Test Method for Ozone Cracking of Rubber in a Controlled Environment
ISO 1431 Test method for resistance to ozone cracking of vulcanized or thermoplastic rubber
ASTM D1171 Standard Test Method for Aging of Rubber - Ozone Surface Cracking Outdoor or in a Test Chamber (Triangular Specimen)
Conditions of Use
Voltage 220V 380V 50Hz
Ambient temperature 5℃～+35℃ Humidity≤85%RH
atmospheric pressure
site requirements
a) There are drains or drains near the Test Chamber.
b) Arrange on-site walls and configure air or power switches of corresponding capacity for the equipment
c) The ground should be flat, well ventilated, free from flammable, explosive, corrosive gases and dust
